Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

6 cyl tacho with V8

Tech Talk for Nissan owners.

Moderators: toaddog, V8Patrol

Forum rules
Post Reply
Posts: 2931
Joined: Mon Jun 21, 2004 2:43 pm
Location: Brisbane

6 cyl tacho with V8

Post by grazza »

After some info on getting a working tacho now I have a V8 in my GQ

Options I have heard about but have little info on:
1. Replace tacho with Nissan 4-cyl of some sort (would like to use existing dash layout)
2. Get some sort of converter circuit
3. Take it to someone who re-jigs them
4. out of ideas....


Anyone out there with experience with this?

ta,
Grazza
Top
Posts: 13555
Joined: Fri Nov 15, 2002 1:28 pm
Location: Melbourne

Post by grimbo »

buy a tacho suitable for a V8
Ransom note = demand + collage
Top
Posts: 4990
Joined: Sun Oct 20, 2002 7:22 pm
Location: Qld, Hilux Country

Contact:
Contact bubs

Post by bubs »

Able instruments

3801 1232

They will be able to recalibrate your existing nissan tacho to the toy V8 ;)
http://www.budscustoms.com.au
Like us and follow on facebook for up to date information of what we are working on and great random specials!

Custom Parts & Fabrication!
Ph: 0417 708 598
Top
Posts: 2931
Joined: Mon Jun 21, 2004 2:43 pm
Location: Brisbane

Post by grazza »

Thanks bubs.

I phoned them and they quoted $130+tax which is not bad.
I would have to take my tacho out and get a new circuit board made up.
Unfortunately the face of the GQ tacho is lit from behind so the face cannot be changed to show a higher RPM.

I guess another option is to by a digital tacho from Dick Smith / Jaycar and mount it somehere (like behing the old tach - cut a hole in it)

Or by an aftermarket analogue tacho thats close in size to the orginal and squeeze it in wher the old one was.

Does anyone know of another Nissan tacho may fit in the GQ dash?
Top
Posts: 4494
Joined: Mon Nov 25, 2002 9:51 pm
Location: Golden Square

Contact:
Contact turps

Post by turps »

If you can find a guage cluster out of a RB30 GQ. They rev to 8000rpm (ok tacho goes that high).
THOUGHT FOR THE DAY....
Top
Posts: 136
Joined: Sat Sep 04, 2004 9:40 am
Location: Wellington, NZ

Post by legsx1 »

I have fitted a V8 into my 1997 GQ shorty and had the tacho recalibrated so it now reads correct. Did not have to alter the panel or wiring at all
worthog who likes to play in the mud, just follow me, if you can
Top
Posts: 2931
Joined: Mon Jun 21, 2004 2:43 pm
Location: Brisbane

Post by grazza »

The guy who quoted me said the signal from the Toyota V8 was a different voltage (not just frequency) and thats why the board had to be modified.
The RB30 GQ sound like a good option. The RB30 may have a compatible signal.
Top
Posts: 4494
Joined: Mon Nov 25, 2002 9:51 pm
Location: Golden Square

Contact:
Contact turps

Post by turps »

grazza wrote:The guy who quoted me said the signal from the Toyota V8 was a different voltage (not just frequency) and thats why the board had to be modified.
The RB30 GQ sound like a good option. The RB30 may have a compatible signal.


I do know that the first VH45 to be done. At AUS4wd, they used it and got it working.
THOUGHT FOR THE DAY....
Top
Post Reply

Return to “Nissan”

Who is online

Users browsing this forum: No registered users and 1 guest