Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

GENERAL TECH INFO

Tech Talk for Suzuki owners.

Moderators: lay80n, sierrajim

Forum rules
Post Reply
Posts: 2296
Joined: Thu Oct 24, 2002 4:30 pm
Contact:
Contact OVERKILL ENG

GENERAL TECH INFO

Post by OVERKILL ENG »

For anyone to post tech info that is usefull.
SAM
OVERKILL ENGINEERING
www.overkill4x4.com
Top
Posts: 4882
Joined: Fri Nov 08, 2002 8:36 pm
Location: Medowie, NSW

Post by redzook »

Zuk springs:
Zuk fronts ~ 37" e-e, ~ 255lbs/inch
Zuk rears ~ 40" e-e, ~ 155lbs/inch

Welding sierra diff
Team UNDERDOG #233
WERock Australia thanks to
[url]http://www.longfieldsuperaxles.com[/url]
[url]http://www.rockbuggysupply.com[/url]
Top
Posts: 11892
Joined: Tue Oct 22, 2002 9:53 am
Location: Melbourne

Contact:
Contact N*A*M

Post by N*A*M »

Sierra 1.3L 86-92 Specs Thread
Top
Posts: 2296
Joined: Thu Oct 24, 2002 4:30 pm
Contact:
Contact OVERKILL ENG

Post by OVERKILL ENG »

Weber mods for Zooks
http://www.off-road.com/suzuki/samurai/webers.htm
OVERKILL ENGINEERING
www.overkill4x4.com
Top
Posts: 2296
Joined: Thu Oct 24, 2002 4:30 pm
Contact:
Contact OVERKILL ENG

Post by OVERKILL ENG »

general 1.3 info
http://www.outerlimits4x4.com/PHP_Modul ... hp?t=11789
OVERKILL ENGINEERING
www.overkill4x4.com
Top
Posts: 2296
Joined: Thu Oct 24, 2002 4:30 pm
Contact:
Contact OVERKILL ENG

Post by OVERKILL ENG »

Tyr sizes for ZOOKS
http://www.outerlimits4x4.com/PHP_Modul ... hp?t=11422
OVERKILL ENGINEERING
www.overkill4x4.com
Top
Posts: 2296
Joined: Thu Oct 24, 2002 4:30 pm
Contact:
Contact OVERKILL ENG

Post by OVERKILL ENG »

Rears up front
http://www.outerlimits4x4.com/PHP_Modul ... php?t=2081
OVERKILL ENGINEERING
www.overkill4x4.com
Top
Posts: 2296
Joined: Thu Oct 24, 2002 4:30 pm
Contact:
Contact OVERKILL ENG

Post by OVERKILL ENG »

spoa vs spua
http://www.outerlimits4x4.com/PHP_Modul ... hp?t=10205
OVERKILL ENGINEERING
www.overkill4x4.com
Top
Posts: 2296
Joined: Thu Oct 24, 2002 4:30 pm
Contact:
Contact OVERKILL ENG

Post by OVERKILL ENG »

General tech info

http://www.twistedandes.com/cont/articulo.php?id=48
OVERKILL ENGINEERING
www.overkill4x4.com
Top
Posts: 3269
Joined: Mon Nov 25, 2002 1:11 pm
Location: melting gears

Post by greg »

Brake Shoes for 1.3 Widetrack with handbrake attached to the rear drums:

Part Number: BB1617

:cool:

Note: this is a different part number to the 1.3L with a handbrake on the x-fer case.
DMA Founding Member #1 - Now Retired
Top
Posts: 3269
Joined: Mon Nov 25, 2002 1:11 pm
Location: melting gears

Post by greg »

Drive Shaft Flange issue for Widetrack Sierras

http://www.outerlimits4x4.com/PHP_Modul ... hp?t=14334

:)
DMA Founding Member #1 - Now Retired
Top
Posts: 3076
Joined: Wed Nov 19, 2003 7:09 am
Location: web wheelin' from sydney

Post by stumped »

gearing info - transfer and diff

http://www.outerlimits4x4.com/PHP_Modules/phpBB2/viewtopic.php?t=8803

http://www.outerlimits4x4.com/PHP_Modules/phpBB2/viewtopic.php?t=13013

http://www.outerlimits4x4.com/PHP_Modules/phpBB2/viewtopic.php?t=10781
___,,,,_('o')_,,,,____
part of the newy conspiracy...
Top
Posts: 6411
Joined: Tue May 27, 2003 11:49 pm
Location: Brisbane Australia

Contact:
Contact Beastmavster

Post by Beastmavster »

http://zookpower.ca/tech.html

Link to tech specs, torque settings, vlave clearances and all that for the Vitara and Sierra.
Top
Posts: 47
Joined: Tue Oct 12, 2004 1:25 am
Location: PERTH W.A.

Post by WHITVIT »

SUZUKI WHEEL STUD PATTERN 5 ON 5.5" M12x1.25 STUD 108MM CENTRE HOLE - BESIDES SUZUKI MODELS THESE RIMS ALSO FIT (CHECK BACKSPAING, CENTRE HOLES AND STUD SIZE)

OLD F100'S
DIHATSU FEROZA AND ROCKY
LADA NIVA
KIA SPORTAGE AND SORRENTO (NICE ALLOYS)

ANY OTHERS :?:
Top
Posts: 7954
Joined: Fri Sep 05, 2003 5:43 pm
Location: Tasmania

Post by DeWsE »

Transfer case arm tech:

http://www.outerlimits4x4.com/PHP_Modul ... hp?t=29937
[quote="STD CONSUMER"]haha, i'm tellin you, my camp was hard to find on Saturday night!
then i shared my bed with 2 second tom... [/quote]
Top
Posts: 2910
Joined: Thu Jan 02, 2003 4:32 pm
Location: Brisbane

Post by -Mick- »

Track widths wms - wms

NT
Front 49 WMS
Rear 49 WMS

WT
Front 52 WMS
Rear 52 WMS
Top
Posts: 292
Joined: Mon Jan 20, 2003 5:43 pm
Location: Liverpool NSW

Post by Charlie »

Lift heights for Suzuki OME lift kits www.drivetrain.com/EMU/emusuzuki/emusuzuki.html
Top
Posts: 1232
Joined: Sun Feb 29, 2004 11:37 pm
Location: Brisvagas

Post by Bad JuJu »

Christover's low budget front end mods.

http://www.outerlimits4x4.com/PHP_Modul ... hp?t=37349


Thanks Chris for the trouble U went to for this
Posting quality not quantity!

Wanted: Stock HiLux Front Leaf Springs
Top
Posts: 1232
Joined: Sun Feb 29, 2004 11:37 pm
Location: Brisvagas

Mercedes Benz 126 steering arms

Post by Bad JuJu »

Tech Disscussion on merc 126 steering arms as can be fitter to Zook Serria for hi-steer conversion

http://www.outerlimits4x4.com/PHP_Modul ... hp?t=37011


Search hit boost terms

Merc 126
drop pitman arm
histeer hi-steer
Posting quality not quantity!

Wanted: Stock HiLux Front Leaf Springs
Top
Posts: 6229
Joined: Thu Dec 12, 2002 10:37 am
Location: melbourne victoria australia

Contact:
Contact christover1

Post by christover1 »

christovers 1.3 Litre Sierra 5spd into 1.0 litre Sierra
Including a swift/barina import swap

http://www.outerlimits4x4.com/PHP_Modul ... hp?t=37821
4WD SUZUKI CLUB VICTORIA
http://www.vic.suzuki4wd.com/forum/
Top
Posts: 2199
Joined: Sat May 01, 2004 4:59 pm
Location: dandenong vic

Contact:
Contact built4thrashing

Post by built4thrashing »

http://photos.groups.yahoo.com/group/ex ... yahoo.com/


just a link to some details on installing a weber on a sierra.
1999 SQ625 Manual Grand Vitara. Lifted, Twin Locked, 31' Extremes, dual Batteries, Winch.
Lots of custom gear as I cant afford the proper stuff.
Top
Posts: 16
Joined: Wed Jan 26, 2005 12:05 pm
Location: Brookvale

Post by 38zook »

suzuki`s are too small and need a heart transplant (get some real power)
Top
Posts: 16
Joined: Wed Jan 26, 2005 12:05 pm
Location: Brookvale

Post by 38zook »

not these weber excuses
Top
Posts: 2199
Joined: Sat May 01, 2004 4:59 pm
Location: dandenong vic

Contact:
Contact built4thrashing

Post by built4thrashing »

i thought this was only for tech and not to hang shait on whats been posted. i put the weber info in here for those that cant afford a biger engine but want nore power. dont knock something ya aint tried
1999 SQ625 Manual Grand Vitara. Lifted, Twin Locked, 31' Extremes, dual Batteries, Winch.
Lots of custom gear as I cant afford the proper stuff.
Top
Posts: 6
Joined: Thu May 05, 2005 4:35 pm

Post by stats »

sam how was the week end
Top
Posts: 117
Joined: Thu May 26, 2005 1:41 pm
Location: Sydney

Post by kimclive »

Lubrication Guide for 1.6l 16V efi Vitara


http://www.outerlimits4x4.com/PHP_Modul ... hp?t=46866
Top
Post Reply

Return to “Suzuki”

Who is online

Users browsing this forum: No registered users and 9 guests