Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.
5L - 2L Diesel engines
Moderators: toaddog, Elmo, DUDELUX
5L - 2L Diesel engines
Hi guys,
I am sure I have heard somewhere before that the 2L (2.4l diesel) and 5L (3l diesel) engines use the exact same 'extras'.
That is, I may need to change my engine sooner than I had hoped. So instead of the big upgrade I was saving for, I mightn eed to do it sooner.
If I swap my 2l-TE with a 5l engine will I be able to bolt on the same turbo, air con, power steer and altenator\vac pump?
Also will the loom or computer need to be replaced?
I am sure I have heard somewhere before that the 2L (2.4l diesel) and 5L (3l diesel) engines use the exact same 'extras'.
That is, I may need to change my engine sooner than I had hoped. So instead of the big upgrade I was saving for, I mightn eed to do it sooner.
If I swap my 2l-TE with a 5l engine will I be able to bolt on the same turbo, air con, power steer and altenator\vac pump?
Also will the loom or computer need to be replaced?
Transport Engineering and Trucking Services
Archerfield Brisbane
Call Simon on 0407 628 191 and say Clown Boy sent you
He will look after your rig, trailer or fleet.
Archerfield Brisbane
Call Simon on 0407 628 191 and say Clown Boy sent you
He will look after your rig, trailer or fleet.
From what ive herd the 5L will bolt up and the turbo etc will be a bolt on deal .
As for the computer depends if you have 2lte if you have get a manula fuel pump and bypass the ecu if you have the throttle body from 2lt 2 then will be even easier but there are more experiencd people who no more than me .
Dave
As for the computer depends if you have 2lte if you have get a manula fuel pump and bypass the ecu if you have the throttle body from 2lt 2 then will be even easier but there are more experiencd people who no more than me .
Dave
Clown Boy wrote:So the turbo will be too small? Bugger. Would this limit what the turbo could do or renderi t useless or what?
The turbo's "effieciency field" wont match the 3 litre's. Basically it will just max out way too early. It will limit your top end performance, down low will be ok though.
\m/
Are you sure?
I hadt he comments here confirmed by a guy very familiar with SURFs who works at (or owns?) a wreckers on South Brisbane.
For clarification - I am talking about changing my 2L (2.4l Turbo Diesel) for a 5L (3.0l Turbo Diesel)
I wanted to wait until I could get a front cut for a 1KZ or something but due to the engine being at death's door - that is all up to chance and how long the engine lasts.
I hadt he comments here confirmed by a guy very familiar with SURFs who works at (or owns?) a wreckers on South Brisbane.
For clarification - I am talking about changing my 2L (2.4l Turbo Diesel) for a 5L (3.0l Turbo Diesel)
I wanted to wait until I could get a front cut for a 1KZ or something but due to the engine being at death's door - that is all up to chance and how long the engine lasts.
Transport Engineering and Trucking Services
Archerfield Brisbane
Call Simon on 0407 628 191 and say Clown Boy sent you
He will look after your rig, trailer or fleet.
Archerfield Brisbane
Call Simon on 0407 628 191 and say Clown Boy sent you
He will look after your rig, trailer or fleet.
Who is online
Users browsing this forum: No registered users and 2 guests