Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

Distrubuter points gap for toyota 3F ?

General Tech Talk

Moderators: toaddog, TWISTY, V8Patrol, Moderators

Forum rules
Post Reply
Posts: 1732
Joined: Tue Feb 11, 2003 11:23 am
Location: Goulburn

Distrubuter points gap for toyota 3F ?

Post by MY45 »

Any one know what it should be set at?
----HillBilly Engineering----
Top
Posts: 101
Joined: Sat Feb 19, 2005 8:20 pm
Location: Logan City, Qld.

Post by Ingenious-Eng »

0.4 to 0.5mm, or 18 to 20 thou, Head down arse up required to, have fun.
Cheers.
Top
Posts: 26
Joined: Thu Sep 30, 2004 11:03 am
Location: Sydney

Post by 80 nsw »

you would be better off with a dwell meter and setting it that way, it's more accurate than just setting the gap.
Top
Posts: 1732
Joined: Tue Feb 11, 2003 11:23 am
Location: Goulburn

Post by MY45 »

80 nsw wrote:you would be better off with a dwell meter and setting it that way, it's more accurate than just setting the gap.


Ive got one...whats the dwel angle meant to be than ?
----HillBilly Engineering----
Top
Posts: 1084
Joined: Sun Apr 04, 2004 9:33 pm
Location: Aotearoa

Post by J Top »

3F
points gap
0.4-0.5 mm
0.016-0.020 thou
Dwell 41 + or - 4 degrees
J Top
Top
Posts: 1732
Joined: Tue Feb 11, 2003 11:23 am
Location: Goulburn

Post by MY45 »

J Top wrote:3F
points gap
0.4-0.5 mm
0.016-0.020 thou
Dwell 41 + or - 4 degrees
J Top


Cheers jtop
----HillBilly Engineering----
Top
Post Reply

Return to “General Tech”

Who is online

Users browsing this forum: No registered users and 3 guests