Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

Spring clamps

General Tech Talk

Moderators: toaddog, TWISTY, V8Patrol, Moderators

Forum rules
Post Reply
Posts: 1949
Joined: Wed Oct 23, 2002 7:44 am
Location: Melbourne, Australia

Spring clamps

Post by MKPatrolGuy »

I've been reading that it is a good idea to open up the clamps on my leaf springs to help them flex a bit better (I need all the help I can get). My question is what is the Best/Easiest way to do it?

TIA

Dave
Top
Posts: 878
Joined: Tue Oct 22, 2002 9:53 am

Post by M&M Custom Engineerin »

just bend them open with a bar or hammer and chisel
Top
Posts: 1949
Joined: Wed Oct 23, 2002 7:44 am
Location: Melbourne, Australia

Post by MKPatrolGuy »

cool, thanks
Top
Posts: 3299
Joined: Fri Nov 08, 2002 8:28 am
Location: Sydney

Post by spazbot »

i prefer to use and angle grinder
www.overkill4x4.com
ph 94766137
Top
Posts: 878
Joined: Tue Oct 22, 2002 9:53 am

Post by M&M Custom Engineerin »

how do you bend them with an angle grinder?

I could probably cut them off with mine
Top
Posts: 1949
Joined: Wed Oct 23, 2002 7:44 am
Location: Melbourne, Australia

Post by MKPatrolGuy »

so is it better to cut them off or bend them out of the way? or doesn't it matter?
Top
Posts: 878
Joined: Tue Oct 22, 2002 9:53 am

Post by M&M Custom Engineerin »

doesnt really matter.

i sound like GQ but, i know a guy that got in shit by the rta for having his open so he had to close them back up.
If you cut them you cant bend them back!
Top
Posts: 3299
Joined: Fri Nov 08, 2002 8:28 am
Location: Sydney

Post by spazbot »

rta can suck my balls,

Hypo when you got defected were they worried bout the spring clamps
www.overkill4x4.com
ph 94766137
Top
Posts: 16934
Joined: Sun Oct 20, 2002 6:57 pm

Post by RUFF »

mickbj42 wrote:I could probably cut them off with mine



Yeah if you had them you prob could :lol:
Top
Posts: 3825
Joined: Wed Nov 06, 2002 8:42 pm
Location: in the sky , its a bird , its a plane ! No its super MOOSE !!!

clamps

Post by moose »

DAve , is good idea just to bend them !!
that way , when it flexs , the sprigs can sometimes try to rotate(slightly)
& the bent up tags act as a guide to keep them in place !!! :lol:
MissForbyNoob wrote:
and one day i'll just become a worthless housewife.
Top
Posts: 7230
Joined: Mon Oct 21, 2002 10:42 pm
Location: Brisbane

Post by MissDrew »

I agree with moose.

I have tried both ways and had HEEPS of trouble with the springs moving. Nick and ruff will remember this :roll:
Top
Posts: 1949
Joined: Wed Oct 23, 2002 7:44 am
Location: Melbourne, Australia

Post by MKPatrolGuy »

Ok, bending it is then :) , now to get off my arse and actually do it
Top
Posts: 568
Joined: Fri Nov 01, 2002 10:11 pm
Location: cranebrook, NSW

Contact:
Contact Ryan

Post by Ryan »

trust me to find that out after i cut mine :roll:


lol
Top
Posts: 7230
Joined: Mon Oct 21, 2002 10:42 pm
Location: Brisbane

Post by MissDrew »

When bending them open just check that they don`t hit anything. If they do then just cut some of them but leaving them sitting higher then the spring pack.
Top
Posts: 3924
Joined: Mon Oct 21, 2002 10:35 pm
Location: Newcastle NSW

Contact:
Contact hypo

nope

Post by hypo »

no James they didnt worry bout the spring clamps wen i got defected
:finger: HYPOFAB :finger:

Thanks to:

Polyperformance
Yuri 4x4
Longfield
Top
Posts: 119
Joined: Wed Oct 23, 2002 7:54 pm
Location: Brisbane, Australia

Contact:
Contact tjpete

Post by tjpete »

Dave,

Considered fabbing or even buying revolver shackles? Very simple, safe and give a significant increase in droop without the risks associated with opening up the spring pack clamps.
Peter Kincade
Top
User avatar
ToNkA
The Haggler!
Posts: 6651
Joined: Sun Oct 20, 2002 8:48 pm

Post by ToNkA »

Opened up the clamps yesterday, and regreased the pack etc, helped a heap. Will wait to see what it does in the long run.
MY JEEP BUILD
v840 wrote: [Not a shot at Tonka] It's like saying, hell I've got two nuts, I may as well cut one of them off for the hell of it. I ain't using it.[/NAS@T] It's ridiculous!
Top
Posts: 1949
Joined: Wed Oct 23, 2002 7:44 am
Location: Melbourne, Australia

Post by MKPatrolGuy »

tjpete wrote:Dave,

Considered fabbing or even buying revolver shackles? Very simple, safe and give a significant increase in droop without the risks associated with opening up the spring pack clamps.


I considered the Revolvers but at over $700 retail for a pair and the fact that a lot of people have bad things to say about them has put me off. And as far as fabbing some myself....lets just say bird crap looks better than my welds...
Top
Post Reply

Return to “General Tech”

Who is online

Users browsing this forum: No registered users and 1 guest