Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

TF 727 Deep pan

Tech Talk for Rover owners.

Moderator: Micka

Forum rules
Post Reply
Posts: 200
Joined: Wed Dec 04, 2002 1:11 am
Location: Perth WA

TF 727 Deep pan

Post by discokid »

Does anybody know where to get a deep auto trans pan for a torqueflite 727 rangie spec. The gearbox is on a slope and the trans pan is made to fit. So the normal Hemi/drag jobbies wont fit
Top
Posts: 200
Joined: Wed Dec 04, 2002 1:11 am
Location: Perth WA

Post by discokid »

22 views and no replies

looks like a custom job for me
Top
Posts: 2195
Joined: Mon Dec 13, 2004 4:38 pm
Location: Sunny Coast, Queensland

Post by Simo63 »

Yeah you may have to get a custom one made up ... the std one is alloy I think ... might even be cast alloy .... and it's definately on a slope too .... it has a couple of holes in the front to bolt a plate between the motor and gearbox doesn't it?? (working from memory here) .... you might be able to get the std one modified to be larger at the rear although you may then run into trouble with it protruding below the chassis rails and the obvious perils that go with that. If capacity is an issue then why not a large oil cooler or maybe a remote reservior setup that holds say 5 or 10 litres and then pumps it through a oil cooler as well ... might be cheaper and easier than larger trans sump?

Cheers
Simo
Top
Posts: 200
Joined: Wed Dec 04, 2002 1:11 am
Location: Perth WA

Post by discokid »

Thought about a remote res set up

The issue is the pump. How much can the standard pump take and how do I get the oil out of the reservior back into the box at the correct rate

Im already running two large capacity coolers
Top
Posts: 2195
Joined: Mon Dec 13, 2004 4:38 pm
Location: Sunny Coast, Queensland

Post by Simo63 »

All good questions dude but I'm sure there is suffient knowledge around to resolve them .. maybe call an auto trans shop that has a history with comp stuff ... they may know how.

Good luck
Simo
Top
Post Reply

Return to “Rover”

Who is online

Users browsing this forum: No registered users and 1 guest