Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

pressing castor bushes out

General Tech Talk

Moderators: toaddog, TWISTY, V8Patrol, Moderators

Forum rules
Post Reply
Posts: 313
Joined: Wed Dec 11, 2002 12:20 pm
Location: Newcastle

pressing castor bushes out

Post by Duff »

how hard is it to press the bushes out. can you do it on a little bench vice or does it need special tools. how much force does it require to get out. also will i stuff them up on the way out
Top
Posts: 1719
Joined: Sun Jan 25, 2004 11:45 am
Location: Brisbane

Contact:
Contact RV80

Post by RV80 »

For radius arms, trailing arms etc you will need a hydraulic
press and special press tools. They are way to tight for a
bench vice, plus it's hard to get them to go in square with
a vice. You will stuff some bushes when removing them.
www.bolsys.com.au
Top
Posts: 313
Joined: Wed Dec 11, 2002 12:20 pm
Location: Newcastle

Post by Duff »

thats all i wanted to know. ill just take it to a suspesion place

cheers
Top
Post Reply

Return to “General Tech”

Who is online

Users browsing this forum: No registered users and 1 guest