Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

steering shakes

Tech Talk for Nissan owners.

Moderators: toaddog, V8Patrol

Post Reply
Posts: 601
Joined: Mon Nov 15, 2004 6:52 pm
Location: North West Melbourne

steering shakes

Post by dwaynes »

alright guys heres my problem at around 80k's i get a bad steering shake i have done the usally with bushes and such. The interesting thing was though that i changed front tyres to rear the problem nearly went away as in only a slight shake and i mean very slight but after two weeks of road driving it is back to what it was.

any ideas?

Forgot to add it is a 89 gq patrol.
Posts: 527
Joined: Sat Oct 02, 2004 3:55 pm
Location: Brisbane

Post by adam.s »

wheel balance?

its probably still there, but you can't feel it through the steering anymore
Posts: 601
Joined: Mon Nov 15, 2004 6:52 pm
Location: North West Melbourne

Post by dwaynes »

thats what it is getting as i speak just want to rule it out


will let you know if it fixes it
Posts: 902
Joined: Wed Jul 21, 2004 5:29 pm
Location: Sydney

Post by stool »

New panhard bush`s and new draglink fixed my shakes
OR :cool: should say almost fixed
GQ with big nuts
Posts: 601
Joined: Mon Nov 15, 2004 6:52 pm
Location: North West Melbourne

Post by dwaynes »

well i panhards have been done a balance has now been down and it is just about right but still noticable at 80k's


so not sure where to go from here
Posts: 485
Joined: Wed May 05, 2004 8:04 am
Location: parramatta

Post by viperguy »

i have found the best way to do wheel balancing is on car...like from a truck place..u get much truer results.

should sort out ur wheel shakes too.. they are either from panhard bushes or wheel balance..and u done bushes.

as above i just dont think a wheel balance machine at ur tyre shop is accurate enough
Posts: 2492
Joined: Sun Nov 24, 2002 8:57 pm
Location: Melbourne

Post by bazzle »

If not panhard bushes always come down to tyres for me. I normally get a Bob Jane Silver or Bronze balance,

Unfortunately one heavy off rd trip and they shake and need doing a gain. Sometimes just rotating front to rear is ok until next trip.

Bazzle
Posts: 601
Joined: Mon Nov 15, 2004 6:52 pm
Location: North West Melbourne

Post by dwaynes »

thanks guys

I had the bronze balance

Would anyone know where i could borrow a set of rims and tyres for a gq Just so i can rule out the tyres themselves. I currently have 32" BFG M/T.

If anyone could help.
Posts: 1781
Joined: Mon May 17, 2004 10:01 pm
Location: Geelong

Post by beretta »

Dwyanes, sorry can't help sorry, but mine has had three different sets of tyres on it in the last 8 months and all with all three, the shakes were very different but always there, have now got second hand 35" procomp muddies and they're the best yet as far as the shakes go! I had all the bushes done in the front end about six months ago and that fixed it for a while, but it has developed a shake again after I went wheelin a couple of weeks ago, so I may have knocked a weight off. It's not too bad so I'm not worried about it, they all (GQ's) seem to do it to some degree.
Posts: 601
Joined: Mon Nov 15, 2004 6:52 pm
Location: North West Melbourne

Post by dwaynes »

thanks everyone
www.mudrhino.com.au
Posts: 58
Joined: Mon Jul 12, 2004 5:33 pm
Location: NSW Central Coast

Post by haycait »

Mate I had the same prob's with my GU TI and eventually gave up in vain after trying the usual things.

Recently I gave it a 2" spring lift without doing the caster correction bush thing......problem solved

It now has no wobbles or viabrations and feels a hell of a lot lighter on the steering in general.

I don't know if this is any help to you ;)

CHeers
Haycait
I have noticed that nothing I never said ever did me harm
Posts: 2
Joined: Thu Mar 11, 2004 5:44 am
Location: Belgium

Post by patrolgr »

hi,
I'm new on this forum. (begian visitor)
I'm having the same problem on mine.
I've noticed that the shake is sometimes worse then normale.
How do you check the panhard bush`s?
could a stronger Steering Stabiliser help?

GR,
Road Ranger
Posts: 10722
Joined: Fri Nov 12, 2004 12:21 pm
Location: In a town near you

Post by Tiny »

mine developed a shake after I got it back from the panel beater week before last.......went and give it a hiding on some rocksteps on sunday and when coming home they had all gone again :D :D :D :D me thinks you should all drive a bit harder and they will go away :finger: :finger: :finger:
If the above post did not offend you in any way please PM me so I can try harder!!
Posts: 601
Joined: Mon Nov 15, 2004 6:52 pm
Location: North West Melbourne

Post by dwaynes »

#Tiny wrote:mine developed a shake after I got it back from the panel beater week before last.......went and give it a hiding on some rocksteps on sunday and when coming home they had all gone again :D :D :D :D me thinks you should all drive a bit harder and they will go away :finger: :finger: :finger:


I concur :armsup: :armsup: :armsup:
www.mudrhino.com.au
Posts: 601
Joined: Mon Nov 15, 2004 6:52 pm
Location: North West Melbourne

Post by dwaynes »

patrolgr wrote:hi,
I'm new on this forum. (begian visitor)
I'm having the same problem on mine.
I've noticed that the shake is sometimes worse then normale.
How do you check the panhard bush`s?
could a stronger Steering Stabiliser help?

GR,


Patrolgr welcome

Checking the bushes i was slack and took it on to be done as this was a new car to me and wanted them changed.

The steering dampener i think will only hide the problem and not fixit
www.mudrhino.com.au
Posts: 601
Joined: Mon Nov 15, 2004 6:52 pm
Location: North West Melbourne

Post by dwaynes »

just an update guys i have now confirmed with the current tyres that have been balanced that when cold no vibration after about 10-15 minutes of driving vibration starts to come back so in my uneducated think that i might have a sidewall issue with one of my tyres.

my next step is to rotate my spare in to see if i can find a single offending tyre.
www.mudrhino.com.au
Posts: 2492
Joined: Sun Nov 24, 2002 8:57 pm
Location: Melbourne

Post by bazzle »

To check bushes hold hand around mount and get someone to push vehicle side to side..

You will feel play, same for steering joints.
Stronger steering damper prob wont help but if yours is crook a good one will.

Bazzle
Posts: 2
Joined: Thu Mar 11, 2004 5:44 am
Location: Belgium

Post by patrolgr »

thanks a lot for the information. I will check these as soon as possible.
maybe I should relpace my tires, the are old. I've got them from a friend who wasn't using them for a long time.
Is it nessesary to use a stronger stearing damper with tires 33" x 12.5"?

Gr,
Posts: 18
Joined: Wed Feb 16, 2005 7:45 pm
Location: Next door

Post by CYRIL »

Ha - the Nissan Wobble. Reckon everyone gets it a bit, some worse than others. Since this is a Tech section I'll post a Tech answer. If you have a lift in the car, depending on the size of the lift you may be prone to a head shake after small bumps in the road. Main reason for this is the angle of the drag link and the panhard rod. What happens is that as the car dips with the bump impact, the diff moves sideways in an arc, which, can then set off a steering head shake. This head shake is exaggerated with larger tyres, and worse if they are not 100% balanced.. Really, the only way to fix this is the return the steering geometry to a more standard position. Wizard has a sleeve that you put in your drag link that then allows your track rod to be bolted up under the pitman arm in stead of on top of it like standard. Requires you to drill out the pitman arm hole though and put a step in the hole. End result (I think from memory) is a 73mm drop in the height of your drag link and a significant increase in the ability to control head shake. Only prob then is you've now created bump steer - so you'll need to either raise the panhard rod mount on the diff, or lower the panhard rod mount on the chassis by a similar distance. I have a mate that has done this and runs 37" bias ply tyres on the road.......as a daily driver and has no issues. Also most people with the drop radius arm brackets swear by them as a head shake stopper, haven't got a set my self, but I do have the skank racing arms in the front and it goes alright and no head shake...I can give you more info on this i you want..I've tried shitloads of combos, up to an 8" lift
Post Reply

Who is online

Users browsing this forum: No registered users and 133 guests