Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

Exhaust Chop Regulations

General Tech Talk

Moderators: toaddog, TWISTY, V8Patrol, Moderators

Forum rules
Post Reply
Posts: 766
Joined: Sun Aug 01, 2004 7:16 pm
Location: brisbane

Exhaust Chop Regulations

Post by bruiser »

Own a 80 series cruiser and looking at choping the exhaust at the back of rear wheel.
1. cause the wheel hits when flexing.
2. the tail muffler catches on everything

Question.
What are the rules as far as where your exhaust can and cant exit.
I heard that it has to be so far from closest door or window.

Any info would be great.
Queensland especially.
Thanks Steve.
Top
Posts: 4583
Joined: Fri Jun 11, 2004 5:57 pm
Location: Wheeling in my backyard

Post by sierrajim »

i was of the understanding that it had to exit behind the most rearward door opening door or window.
[quote="Harb"]Well I'm guessing that they didn't think everyone would carry on like a big bunch of sooky girls over it like they have........[/quote]
Top
Posts: 766
Joined: Sun Aug 01, 2004 7:16 pm
Location: brisbane

Post by bruiser »

does that mean it can come out the side behind rear door?
Top
Posts: 1340
Joined: Sat Feb 15, 2003 8:29 pm
Location: ACT

Post by diesel028 »

Id say not, if you have the barn doors it would have to be out past those. If you have the tailgate style 80 series it might be a different story.
Top
Posts: 34
Joined: Wed Feb 23, 2005 6:55 pm
Location: Brisbane

Post by 80-RPM »

Tail pipe must exit no furthure foward than the last pivitod/sliding/roll down/roll up window

and must not exceed past the outer most dimensions of the vehicle
Top
Post Reply

Return to “General Tech”

Who is online

Users browsing this forum: No registered users and 4 guests