Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

Challenger Springs

Tech Talk for Mitsubishi owners.

Moderator: -Scott-

Forum rules
Post Reply
Posts: 1130
Joined: Thu Nov 18, 2004 7:25 pm
Location: New Zealand

Challenger Springs

Post by NJV6 »

HI, I have a Pajero and am wondering if Challenger springs will fit, been offered HD challenger ones.

cheers,Glen
Top
Posts: 2739
Joined: Sat Oct 26, 2002 7:50 am
Location: Melbourne

Post by Bitsamissin »

Well I have got different part number listings for Challenger and Paj rear coils so they are not identical but thats not to say they wouldn't fit or work ok.
Chuck em in and see, it's not a big job..........................
I just luv my "clacker Jabber"
Top
Posts: 1130
Joined: Thu Nov 18, 2004 7:25 pm
Location: New Zealand

Post by NJV6 »

Thanks Frank, I don't have these springs as yet, but they are 18.5cm outside diameter. can anyone confirm what diameter a Pajero spring is?

thanks, glen
Top
Posts: 191
Joined: Sat Jan 18, 2003 6:23 pm
Location: melb

Contact:
Contact pickle

Post by pickle »

I measured 17.6 cm and 17mm thick of my old NJ springs......tell me if they are interchangable if you get around to it ....just purchased a Challenger as well.
Dave
Top
Posts: 1130
Joined: Thu Nov 18, 2004 7:25 pm
Location: New Zealand

Post by NJV6 »

Thanks Dave, im thinking they won't due to the extra cm diameter. I'll have a measure up tomorrow and let you know the outcome.

cheers, Glen
Top
Posts: 1130
Joined: Thu Nov 18, 2004 7:25 pm
Location: New Zealand

Post by NJV6 »

OK, update on challenger springs - they are quite different to Pajero ones, they don't fit. (well they do but not satisfactorily!)

I had some Heavy duty Challenger ones (16mm), whipped out one Paj one, from then on it was quite obvoius, the Challenger ones were a good 4 inches shorter than standard Paj ones, and the Challenger ones were about 1 cm bigger in overal diameter.

While it was out I took a photo of the two together, will try to get that up sometime this week.

Cheers, Glen
Top
Post Reply

Return to “Mitsubishi”

Who is online

Users browsing this forum: No registered users and 1 guest