Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.
brakes on bj 40
Moderators: toaddog, Elmo, DUDELUX
brakes on bj 40
just changed the back brake shoes do the springs go behind the cylinders i have them in the front pls i need help not to good at this lol and can any one tell me i have a b motor with after market turbo got ever thing in bits motor was complete but do i need a throtle body im told i dont but how do i get the thing to go with out one hope some one can help me it has a pipe running form inlet to turdo i think i need to cut it and fit the throtle body the turbo hose to the pipe so i can have a accelator pls do help thanks
Take hub etc off so you have plenty of room..
Put wheel cylinders on first then line up the shoe plates, adjusting sprocket thingo and then lateral retaining springs.
Theres 2 springs on slotted washers you push in and turn with pliers to keep the shoe plates in place, they are at "3 oclock and 9 oclock" when you are looking at the assembly.
The springs and plates sit under the wheel cylinders not quite sure what you mean by 'behind' them...they need to go on before the hub hoes back on..
Turbo, I wish i knew...not much help there...you could try bj42turbo (Daz) for advice on how it is set up....
Are you a Melbourne feller?
Put wheel cylinders on first then line up the shoe plates, adjusting sprocket thingo and then lateral retaining springs.
Theres 2 springs on slotted washers you push in and turn with pliers to keep the shoe plates in place, they are at "3 oclock and 9 oclock" when you are looking at the assembly.
The springs and plates sit under the wheel cylinders not quite sure what you mean by 'behind' them...they need to go on before the hub hoes back on..
Turbo, I wish i knew...not much help there...you could try bj42turbo (Daz) for advice on how it is set up....
Are you a Melbourne feller?
www.3rdrock4x4.com
forty_forty wrote:buy the way r u the scott that put me on to this site i spoke to a scott on the phone about a stater i had and how do i find dazza pls thanks trev
let's not talk about starter motors should have called you back...
yes it is excellent deduction watson
Dazz is bj42turbo you can find him in his members area - ask him there, sound bloke, and will tell you all about 3Bs and turbos till the cows come home.
http://www.outerlimits4x4.com/PHP_Modul ... 2&start=90
OR if you hit the PM button at the bottom left corner of a post it will send the owner of the post a 'private message' like an email..don't know if you worked that one out but there's $0.02 for you.
keep asking the questions someone will have the answers!
www.3rdrock4x4.com
Who is online
Users browsing this forum: No registered users and 0 guests