Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

Ride height

Tech Talk for Rover owners.

Moderator: Micka

Forum rules
Post Reply
Posts: 55
Joined: Mon Jul 19, 2004 8:31 pm
Location: Toowoomba

Ride height

Post by Mudrat »

Just a quick question, just installed lovells raised coils in the rangie and when measuring the ride height, all 4 wheel arches are the same height off the ground, is this best or should the rear be a little higher. The springs are standards height rears in front ie 2' lift there and then raised ones in the back to level it out. :lol: Thanks in advance

Cheers
Go it or blow it
Top
Posts: 10984
Joined: Thu May 29, 2003 3:47 pm
Location: Bum drilling with my buddy Ray!

Post by GRIMACE »

for a better identification of ride height, its good to measure the belt line (line that continues from the bottom edge of bonnet along the full length of the car).
The back should be slightly higher than the front ;)
Top
Post Reply

Return to “Rover”

Who is online

Users browsing this forum: No registered users and 1 guest