Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.
Rear disc brakes for lux
Moderators: toaddog, Elmo, DUDELUX
Rear disc brakes for lux
I cant be stuffed searching and you guys no were and who has all the parts to do this conversion .I want to do this then hopefully still run a handbrake cable to the rear better hand brake any info would be great
have a look at John 4runner he put disk in the ass end.
http://www.toyotasurf.asn.au/forum/viewtopic.php?t=1011&highlight=disk+brakes
Chris.
http://www.toyotasurf.asn.au/forum/viewtopic.php?t=1011&highlight=disk+brakes
Chris.
http://www.sky-manufacturing.com/
There are a couple of pics on the Sky Manufacturing page of their brackets to fit disk brake callipers.
There are a couple of pics on the Sky Manufacturing page of their brackets to fit disk brake callipers.
You do not have the required permissions to view the files attached to this post.
nm /nk pajero discs and calipers fit on...
the calipers alreay have a e-brake leg built onto em...
i made my mounts out of 8mm flat plate...the caliper lined up with the disc perfectly...
cost me $80 inc the calipers and discs and lines...and a bit of time...
the calipers alreay have a e-brake leg built onto em...
i made my mounts out of 8mm flat plate...the caliper lined up with the disc perfectly...
cost me $80 inc the calipers and discs and lines...and a bit of time...
Mud4b/ OPT, Cheap rates, Not cheap work. Search Opt- option offroad on facebook. Call or Sms 0439609525.. Sunshine coast, Eudlo, 4554.
mud4b wrote:nm /nk pajero discs and calipers fit on...
the calipers alreay have a e-brake leg built onto em...
i made my mounts out of 8mm flat plate...the caliper lined up with the disc perfectly...
cost me $80 inc the calipers and discs and lines...and a bit of time...
did you need to machine the end of the axle to fit inside the rotor.
i did have a bees dick taken off the axle.. i think lux discs would overcome this.
some pics
some pics
You do not have the required permissions to view the files attached to this post.
Mud4b/ OPT, Cheap rates, Not cheap work. Search Opt- option offroad on facebook. Call or Sms 0439609525.. Sunshine coast, Eudlo, 4554.
Give Gonads a call, he did my rear disc brake conversion with cable operated calipars. 45879811, I will try add pics
http://community.webshots.com/scripts/e ... =259905063
http://community.webshots.com/scripts/e ... =259905063
You do not have the required permissions to view the files attached to this post.
Mczook wrote:Give Gonads a call, he did my rear disc brake conversion with cable operated calipars. 45879811, I will try add pics
http://community.webshots.com/scripts/e ... =259905063
Can't view the pics
Who is online
Users browsing this forum: No registered users and 3 guests