My high Low transfer box is cliking when in 4 low in 2nd gear while under power.
i beleave it is the chain slipping. This is the second time that i have had to fix this. Last time i had to replace the hole unit.
Is there any way in helping to stop this problem i have or am i just to hard on the truck.
the truck is 91 SWB soft top 2.5d
Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.
Transfer box Help
Moderator: -Scott-
Transfer box Help
92 vx landcruiser
4" supension lift
1" body lift
35" MT wangers
4" supension lift
1" body lift
35" MT wangers
I'm guessing it's a super select t/case ??
If so they had much beefier chains than the earlier (non super select cases) and are reasonably strong.
Unfortunately there is no scope for adjustment and once they stretch have to be replaced with a new item ($500-600 from Mitsu).
Proby cheaper to get a 2nd hand t/case from a wreckers and keep your old one for spares.
If so they had much beefier chains than the earlier (non super select cases) and are reasonably strong.
Unfortunately there is no scope for adjustment and once they stretch have to be replaced with a new item ($500-600 from Mitsu).
Proby cheaper to get a 2nd hand t/case from a wreckers and keep your old one for spares.
I just luv my "clacker Jabber"
Who is online
Users browsing this forum: No registered users and 0 guests