The sliders are on :)

Post by **Tiny** » Sun Feb 27, 2005 9:36 pm

Just got a set of funky sliders on the GQ ofj Jeremy, Impact Offroad ( Surfection on this board ) fitted today, and went for a strap on some nice rock steps in a secret location to test them out.....bent both quarters

, and the sliders came off unmarked :finger:

, top job.

These things are as good as the Snake ones, and at $750 fitted, I wouldn't go past them, and they are sealed so can use as air tanks as well. let me know if pics are required.

Cheers Jeremy for a bloody well done job, when I chop the quarters I will come and see for a rear bar, and a cheezy style winch bar when funds allow

Tiny

Post by **adam.s** » Sun Feb 27, 2005 9:40 pm

pics sounds good

Post by **ozy1** » Sun Feb 27, 2005 9:40 pm

pics required plz

Post by **Screwy** » Sun Feb 27, 2005 9:43 pm

would love some also

Post by **Tiny** » Mon Feb 28, 2005 7:20 am

Screwy_ScrewBall wrote:would love some also

Pics or sliders????? will post some tonight

Post by **KIWI** » Mon Feb 28, 2005 2:34 pm

You can post me some sliders :lol:

Post by **Tiny** » Mon Feb 28, 2005 2:39 pm

KIWI wrote:You can post me some sliders

for the right cash...................... yeah :finger:

Post by **MARKx4** » Mon Feb 28, 2005 4:07 pm

When are we getting pics :?:

Post by **Tiny** » Mon Feb 28, 2005 4:31 pm

Mark Costello wrote:When are we getting pics

Just got home and need to extract the pics and upload.....give me time :bad-words:

Post by **Tiny** » Mon Feb 28, 2005 4:54 pm

Ok, the camera wont work at the mom so picks from testing them yesterday gives ok shot...... + complimentry shot of the grasshopper

Will try again to take some pics now

Post by **Tiny** » Mon Feb 28, 2005 6:41 pm

camera decided to work again, user problem I think

Post by **Tiny** » Mon Feb 28, 2005 6:43 pm

note that these normaly use a u - bracket arrangment but due to GQ with no body lift, we decided to attempt any way and this was the method......very happy, bloody strong to

Post by **Screwy** » Mon Feb 28, 2005 7:13 pm

You wont break those. Not in a long shot

Look very nice.

are they powder coated?

screwy

Post by **Hoonz** » Mon Feb 28, 2005 7:22 pm

eh if u drive anything like i do they'll bend ehehehe

i bent mine .. 3 mounts and 6mm wall 100x50 RHS

Post by **blkmav** » Mon Feb 28, 2005 7:47 pm

They almost look like mine

Post by **Surfection** » Mon Feb 28, 2005 8:01 pm

#Tiny wrote:Cheers Jeremy for a bloody well done job, when I chop the quarters I will come and see for a rear bar, and a cheezy style winch bar when funds allow

Tiny

No worries at all mate. We can build you a winch bar no probs but it won't be a 'Cheezy Style' bar, I know how much it shits Cheezy to have his hard earned style of work copied so as long as you're cool with something unique and different that's fine by me !!

Post by **Screwy** » Mon Feb 28, 2005 8:36 pm

Surfection wrote:
#Tiny wrote:Cheers Jeremy for a bloody well done job, when I chop the quarters I will come and see for a rear bar, and a cheezy style winch bar when funds allow

Tiny

No worries at all mate. We can build you a winch bar no probs but it won't be a 'Cheezy Style' bar, I know how much it shits Cheezy to have his hard earned style of work copied so as long as you're cool with something unique and different that's fine by me !!

nice work jeremy

Post by **Chookman** » Mon Feb 28, 2005 8:39 pm

Love the sliders.
Are there any legal problems with welding on to the chasis??

Chook

Post by **Screwy** » Mon Feb 28, 2005 9:02 pm

Chookman wrote:Love the sliders.
Are there any legal problems with welding on to the chasis??

Chook

as long as u weld ontop the outside of the chassis its fine.

its only if u weld to the top or inside do u have problems.

screwy

Post by **Tiny** » Tue Mar 01, 2005 6:51 am

yeah, bit of pipe and somewhere to mount a winch......anything goes as long as its strong.

you want that alloy bar still Screwy???

Post by **morkz** » Tue Mar 01, 2005 9:23 am

you need to make that wagon into a UTE saves money on a rear bar and and rear quarter chop.

all in all looks awesome.

Post by **Tiny** » Tue Mar 01, 2005 9:29 am

morkz wrote:you need to make that wagon into a UTE saves money on a rear bar and and rear quarter chop.

all in all looks awesome.

thanks mate, I intend to, but money is the prob now.......quarter shop will be makeshift anf prolly wont bother with a bar...intend an xxxxtra cab

Post by **XXL Maverick** » Wed Mar 02, 2005 9:39 am

Nice sliders dude, even better pinstripes!!!

Post by **morkz** » Wed Mar 02, 2005 10:29 am

#Tiny wrote:
morkz wrote:you need to make that wagon into a UTE saves money on a rear bar and and rear quarter chop.

all in all looks awesome.

thanks mate, I intend to, but money is the prob now.......quarter shop will be makeshift anf prolly wont bother with a bar...intend an xxxxtra cab

yeah nice work exxxtra cab is the way to go.

Post by **Adsman** » Tue Mar 08, 2005 4:42 pm

note that these normaly use a u - bracket arrangment but due to GQ with no body lift, we decided to attempt any way and this was the method......very happy, bloody strong to

What guage steel did you use for the mount plates and box steel to chassis mounts.

Post by **Robbo** » Wed Mar 09, 2005 12:44 am

How do you get em off to repair em when they bend or something, not that they don't look good & strong but that country side your pix taken in! hmmm shit will happen! :cool:

Post by **Tiny** » Wed Mar 09, 2005 8:52 am

Adsman wrote:
note that these normaly use a u - bracket arrangment but due to GQ with no body lift, we decided to attempt any way and this was the method......very happy, bloody strong to

What guage steel did you use for the mount plates and box steel to chassis mounts.

suggest you
pm surfection for the finer details mate

Post by **Tiny** » Wed Mar 09, 2005 8:55 am

Robbo wrote:How do you get em off to repair em when they bend or something, not that they don't look good & strong but that country side your pix taken in! hmmm shit will happen!

wil think about that when we get there. :oops:

........at the moment, I am happy to have something on there as it is near impossible to get anything on with GQs with no body lift

Outer Limits 4x4 Board

The sliders are on :)

The sliders are on :)

Re: The sliders are on :)

Re: The sliders are on :)

Who is online