3 link coil conversion

Post by **rocknferoza** » Mon Apr 14, 2003 6:22 pm

Hey guys

I finaly took some pics of the 3 link setup on the feroza

I'll try and get them on here later tonight

cyas

Post by **rocknferoza** » Mon Apr 14, 2003 8:07 pm

heres a couple of pics

Post by **rocknferoza** » Mon Apr 14, 2003 9:03 pm

more pics

Post by **Ferwoaza** » Mon Apr 14, 2003 9:45 pm

Looking good mate

How much lift do you have in the back now? They the coils that came with the kit or did you put longer ones in? Curious to know how high you could go with that setup...

Post by **rocknferoza** » Mon Apr 14, 2003 10:39 pm

The feroza sits about 40mm higher then before the conversion. But I was told the rear leaves had sagged about an inch so the coils have only lifted the back around an inch over stock.

The coils that are under it now came with the kit and I have another set of shortened 80 series front coils.

I wanna lift the rear about another 2-3 inches and maybe crank the torsion bars another 20mm

Post by **rocknferoza** » Mon Apr 14, 2003 10:46 pm

even more pics 8)

Post by ***BESTY*** » Tue Apr 15, 2003 12:21 am

Nice Ramp

It would be good to see some action shots !

Website · Post by **murcod** » Tue Apr 15, 2003 10:24 am

Nice set up. So who makes the conversion kit and where did you get it from????

Post by **rocknferoza** » Tue Apr 15, 2003 5:52 pm

Nice set up. So who makes the conversion kit and where did you get it from????

STAR 4x4 ( stand toulouse auto racing ) in France make the kit.

I bought the kit second hand from the ultimute suspension stockist on the gold coast and then got a good mate of mine 2 fit the kit up.

Post by **rocknferoza** » Tue Apr 15, 2003 5:57 pm

few more pics :wink:

Post by **rocknferoza** » Tue Apr 15, 2003 6:07 pm

2 more

Post by **rocknferoza** » Tue Apr 15, 2003 6:23 pm

murray u have a PM :wink:

Website · Post by **murcod** » Wed Apr 16, 2003 1:24 pm

James, are they Rancho shocks you've got too? How do like them?

Post by **robbie** » Wed Apr 16, 2003 1:25 pm

get cracking on a front end conversion now

Post by **rocknferoza** » Wed Apr 16, 2003 9:09 pm

James, are they Rancho shocks you've got too?

No, I've got a set of Gibbson Ryder shocks on it at the moment.

They are the shocks that were on the other feroza that the kit came out of.

I'd like 2 put a set of ranchos in the back so I can adjust them 2 suit the terrain I'm on.

How do like them?

I dont like the Gibbson Ryders much. Not sure if it because there warn out or what but there 2 soft and the shocks bottom out fairly easy plus there 2 long.

Post by **tritonasuras** » Thu Apr 17, 2003 10:36 pm

Hey James,
Nice lift.... need some new rubber ...

How did u source the kit and do the have them for other vehicles ??

Ta

rob

Post by **rocknferoza** » Sun Apr 27, 2003 11:08 am

Hey James,
Nice lift.... need some new rubber ...

thanx but I wanna go higher :finger:

Still heaps of tread left on those muddies but I would like 2 get a set of 32x9.5r15 simex centipedes 8) 8) 8)
I rang a local simex dealer yesturday 2 find out how much they were and the bloke said u can't get them in that size. I told him I've seen a few 4WDs running them in the comps and he said they must be importing them.
He said i could get them in 30x9.5 or 31x10.5 but i've never heard of them in a 30x9.5. The blokes going 2 ring his supplier tomorrow and i'll let yas know tomorrow.

How did u source the kit and do the have them for other vehicles ??

I bought the kit second hand from the ultimute suspension stockist on the gold coast.
Not sure if star 4x4 make other kits but u possibly could find a wrecked challenger and bolt the coil rear end up 2 the triton :finger:

Post by **rocknferoza** » Sat Apr 09, 2005 2:20 pm

TTT

Thought I would bump this back up 2 the top for those who havent seen the pics of my suspension setup. :twisted:

Had 2 Tonka the pics as they went missing after the board was hacked :cry:

Outer Limits 4x4 Board

3 link coil conversion

3 link coil conversion

Who is online