Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.
Boost Pressures
Boost Pressures
Hi guys. Just wandering what sort of boost pressures i can go up to SAFELY on my Patrols SD33T. I have noticed the wastegate opens at about 5.7psi (wastegates always open a tad before their set pressure).
Was just curious as to what I could go safely up to. The car has got a boost guage to read off, and I was thinking of getting a manually adjusted pressure control valve that everybody is selling.
Cheers - Coxy
Was just curious as to what I could go safely up to. The car has got a boost guage to read off, and I was thinking of getting a manually adjusted pressure control valve that everybody is selling.
Cheers - Coxy
Diesel and petrol engines work differently with boost. A petrol engine you wind up the boost and add fuel to suit whereas with a diesel you wind up the fuel and add boost to suit. Boost alone won't do much.
http://www.outerlimits4x4.com/viewtopic ... 6&t=231346j-top paj wrote:gayer than jizz on a beard
The origianal sd33t has a boost compensator that is said to follow pressure up to about 12,8 PSI. Look at the rear of your intake manifold, there should be a thin tube running from there around the back of the engine and into the diesel injection pump.
I'm running 10.7 PSI on mine whitout adjusting the pump, and i notice a considerable increase in power. Scroll down here and see how i did it: http://www.outerlimits4x4.com/PHP_Modul ... hp?t=17281
Engine intake temperature is another issue to have in mind. I've been recommended not to go further up in pressure before attaching an intercoler, but i know people up here who's been running at 17PSi with a cut-down truck intercooler
I'm running 10.7 PSI on mine whitout adjusting the pump, and i notice a considerable increase in power. Scroll down here and see how i did it: http://www.outerlimits4x4.com/PHP_Modul ... hp?t=17281

Engine intake temperature is another issue to have in mind. I've been recommended not to go further up in pressure before attaching an intercoler, but i know people up here who's been running at 17PSi with a cut-down truck intercooler

totto
Yeah, I've been thinking of the intercooler idea, but i need a donor bonnet (couldn't bring myself to cutting my good one), small intercooler and all the piping. I reckon I could get my body lift and new (second hand) 35" muddies for the same price.
Hhhmmm... decisions, decisions.
I'll take the latter.
Coxy
Hhhmmm... decisions, decisions.
I'll take the latter.
Coxy
Some pictures here, the ic is from iveco. Norwegian site, though, so we have to trust that pictures says more than words.
http://www.offroad.no/snitz/topic.asp?T ... ntercooler
some more here....
http://www.offroad.no/snitz/topic.asp?T ... ntercooler
And here is a cut-down volvo FH12 intercooler
I'm gonna look for one of those for my patrol.....
http://www.offroad.no/snitz/topic.asp?T ... ntercooler
some more here....
http://www.offroad.no/snitz/topic.asp?T ... ntercooler

And here is a cut-down volvo FH12 intercooler
I'm gonna look for one of those for my patrol.....

totto
Who is online
Users browsing this forum: No registered users and 2 guests