Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

fuel tank mounting

General Tech Talk

Moderators: toaddog, TWISTY, V8Patrol, Moderators

Forum rules
Post Reply
Posts: 654
Joined: Mon Oct 27, 2003 1:24 pm
Location: singleton

fuel tank mounting

Post by CHOPZUKI »

has anyone mounted there tank inside the cabin of a wagon or such?

im going to mount mine in the back of my hardtop and need to know the rules im going to have to comply with for engineering, etc.

any info would be great :cool:

cheers

steve.
Top
Posts: 2492
Joined: Sun Nov 24, 2002 8:57 pm
Location: Melbourne

Post by bazzle »

Nomally need a sealed chamber vented to outside minimum. Talk to the chap who is going to engineer it for you.

Bazzle
Top
Posts: 35
Joined: Fri Feb 18, 2005 2:31 pm
Location: WA

Post by outlandy »

remember 40 series cruiers had thier fuel tanks under the seat so it cant be too much drama ;)
Top
Posts: 615
Joined: Thu Oct 23, 2003 12:37 pm
Location: Brisbane, QLD.. Posts: Too Many.

Post by Meldge »

outlandy wrote:remember 40 series cruiers had thier fuel tanks under the seat so it cant be too much drama ;)


They were done as standard, you are trying to modify a model that was not like this from factory, that may cause a difference.

I reckon it would in QLD anyway...

Go with the chamber setup. Sealed from internal cabin, but vented to outside.
Meldge...

86' Landcruiser - MWB Soft Top
Kustom, Kustom and more Kustom to Kome,
Store bought is not as fun...

[quote="Meldge"]Not too long, not to short, it's Middy - It's Just right... :armsup:[/quote]
Top
Posts: 654
Joined: Mon Oct 27, 2003 1:24 pm
Location: singleton

Post by CHOPZUKI »

thanks for the input guys just wanted to know if anyone had done this sort of conversion and how they went with it.
Top
Post Reply

Return to “General Tech”

Who is online

Users browsing this forum: No registered users and 122 guests