Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

Getting paint off windscreen

General Tech Talk

Moderators: toaddog, TWISTY, V8Patrol, Moderators

Forum rules
Post Reply
Posts: 191
Joined: Sat Dec 07, 2002 10:25 am
Location: Sydney

Getting paint off windscreen

Post by dansTOYOwagon »

My car was at a panel beaters a year or so ago, and it got little specs of paint (overspray from primer) on the front windscreen. I'm speaking about 15dpi.

Whats the best way to get it off? I've tried all the basic stuff I have in the shed -- turps etc, but to no avail. A razor blade does get it off, but I'm worried about scratching the glass.

Any suggestions ?!?
Top
Posts: 615
Joined: Thu Oct 23, 2003 12:37 pm
Location: Brisbane, QLD.. Posts: Too Many.

Post by Meldge »

If it is on the outside, just take it easy with the razor blade, just keep it wet when doing it.

Same applies to shaving, dont run the blade sideways (even though i used to on glass) and keep it on a good angle.

Just be gentle...
Meldge...

86' Landcruiser - MWB Soft Top
Kustom, Kustom and more Kustom to Kome,
Store bought is not as fun...

[quote="Meldge"]Not too long, not to short, it's Middy - It's Just right... :armsup:[/quote]
Top
Posts: 2097
Joined: Mon Jun 14, 2004 8:06 pm
Location: Land of Plenty

Post by blkmav »

Clay bar
Weekdays - Prado GXL D4D with some stuff
Weekends - Mav shorty with lots of stuff
Top
Posts: 191
Joined: Sat Dec 07, 2002 10:25 am
Location: Sydney

Post by dansTOYOwagon »

Okay sweet thanks Meldge, I'll do that.

I'll get onto now!
Top
Posts: 766
Joined: Mon Dec 30, 2002 3:08 pm
Location: Melbourne

Post by jtraf »

A grade paint thinner will get it off easy as......

Just keep it away from paint or you will get a real shiny spot when it dries
Top
Posts: 367
Joined: Fri Jan 21, 2005 10:45 am
Location: Tasmania

Post by Tas_Dean »

A copper (1 or 2c piece) laid flat on the glass will scratch the paint off without scratching the glass.

Thinners should get it off easily though.

Cheers, Dean
Just a web wheeler now!
Top
Posts: 191
Joined: Sat Dec 07, 2002 10:25 am
Location: Sydney

Post by dansTOYOwagon »

Cool thankyou all. Done now, and looks great ;)

Just went with a wet blade, then polished it all up with some ammonia.

Thanks!!
Top
Post Reply

Return to “General Tech”

Who is online

Users browsing this forum: No registered users and 5 guests