Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

15 inch rims on GU ute???

Tech Talk for Nissan owners.

Moderators: toaddog, V8Patrol

Post Reply
Posts: 249
Joined: Wed Apr 14, 2004 6:00 pm
Location: West Aus

15 inch rims on GU ute???

Post by KaMo »

Hello, just a quick one as the subject suggests....can you fit 15x8 rims on a GU ute???.....asking for a mate............................................toyota forever :D
Posts: 1781
Joined: Mon May 17, 2004 10:01 pm
Location: Geelong

Post by beretta »

Calipers are too big apparently, has to be 16's.
Posts: 3739
Joined: Sat Dec 11, 2004 10:10 pm

Post by mickyd555 »

ive got 15x7 rims on my GU, they fit ok.....i dont see why 15x8 wouldnt, but i could be wrong
Posts: 278
Joined: Sun Aug 22, 2004 5:00 pm
Location: newcastle

15x8

Post by china »

i got 15x8's on mine...
Posts: 4426
Joined: Mon Mar 22, 2004 4:39 pm
Location: Sunshine Coast

Post by bru21 »

as far as i know its only the late model wagons like the 4.8 pettys have the bigger callipers. i have 15x10 on my gu diffs sweet as (2.8 diesel wagon model)

cheers bru
ADHD Racing would like to thank
Mrs Bru @ Sunshine Coast Developmental Physiotherapy - www.scdphysio.com.au , Ryano @ Fourbys www.generaltire.com.au Blitzkrieg Motorsport
Posts: 2388
Joined: Sun Nov 24, 2002 10:20 pm
Location: bacabugari

Post by big red »

i have 15x8, 15x8 beadlocks, 15x10 and even a set of old hilux 15x7 rims [with the centre hole ground out a bit to fit over the hub] on my GU ute.

yeh yeh, all at different times before you ask :roll:

:D
[url=http://bigred.redbubble.com/][color=red][b]You can follow me but its gunna hurt ![/b][/color][/url]
event pics http://bigred.redbubble.com/
Posts: 71
Joined: Mon Sep 13, 2004 12:50 pm
Location: Melbourne

Fits but risky

Post by Not For Highway Use »

!5 inch rims will work on GU. On the front you are left with only a 5mm clearance on the calipers. Will be fine as long as you don't pick up a smal rock or slightly bend the rim. Most steel rims aren't round either. Also reduced cooling for brakes.
Posts: 1781
Joined: Mon May 17, 2004 10:01 pm
Location: Geelong

Post by beretta »

There you go, I was slightly miss informed I guess. :?
Posts: 1508
Joined: Thu Jun 26, 2003 9:48 am

Post by MQ080 »

The only 15" to go over the new brake setup is an 8" with with at least -28 offset. Obviously anything higher will fit, however this is the cheapest 15 on the market that will bolt straight on no worries
Posts: 269
Joined: Mon Jun 07, 2004 12:54 am
Location: Sydney

Post by X-R-Cist »

im buying a set of 15X8 rims with 32's on them
should fit fine on a 2.8 GU right?
Posts: 249
Joined: Wed Apr 14, 2004 6:00 pm
Location: West Aus

Post by KaMo »

Thanks for your help. A mate of mine is looking at buying a 2000 GU ST Coil Cab Ute with the 4.2TD. The reason i asked about the rims is that he has a set of 33X12.5X15 STT's on his troop carrier and we were wondering if they would fit or whether he'd have to get a 16" tyre. I must admit, myself being a tojo fan all the way, I was hell impressed by the level of comfort etc in this ute. I have not compared prices but i think that what you get in these things is a bit better value and lesser price than the old 79 series RV ute.

Are there any problems or issues that are common and that he should be on the lookout for when inspecting this model ute??? Any comments greatly appreciated....cheers :D
Posts: 1508
Joined: Thu Jun 26, 2003 9:48 am

Post by MQ080 »

X-R-Cist wrote:im buying a set of 15X8 rims with 32's on them
should fit fine on a 2.8 GU right?


They will bolt straight on
Posts: 1508
Joined: Thu Jun 26, 2003 9:48 am

Post by MQ080 »

KaMo wrote:Are there any problems or issues that are common and that he should be on the lookout for when inspecting this model ute??? Any comments greatly appreciated....cheers :D


Have you looked in the GU Bible?
Posts: 249
Joined: Wed Apr 14, 2004 6:00 pm
Location: West Aus

Post by KaMo »

Yer...but im a little slack and busy studying...so i thought for a quick result i'd ask all you knowledgable bunch. :cool:
Posts: 343
Joined: Mon Apr 07, 2003 12:25 pm
Location: Vic Australia

Post by Robbo »

Yeh my turn. As long as they are toyota offsett cos its the inside of the spokes that touch the caliper if they are nissan offset. Its not so much the diameter but the offset angle on the rim centre. Yep clear as mud. :D
if you want it done properly do it yourself
Post Reply

Who is online

Users browsing this forum: No registered users and 40 guests