Notice: We request that you don't just set up a new account at this time if you are a previous user. If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.
I am probably borderline breaking the rules of the forum posting this here, but one of the blokes knocking these Rock Bars up has done heaps for getting us onto private land with no rego needed and running amok amongst the big rocks. So I think a bit of free advertising in return isn't too much to ask.
how much??
does he do them to suit 2inch body lift?
H( * )( * )NZ loves B( * )( * )BIES
if a fat lady falls in the forest do the trees laugh?
[quote="RUFF"]although i didnt mean to, i squealed like a girl :armsup:[/quote]
I put the phone number there, I don't know if they have a firm retail price, they were going to try wholesaling them to all the usual suspects as well. So far I think they have built prototypes for 75 series and 1st gen Hilux as well.
Very nice, when i get around to doing something with the Patrol I might have to update the bar to something like that.
I really want to get some of our club guys up to that property but they all whinge about it being too far from melb, maybe when the weather is better I can convince them
There is two ways to come up, through lakes entrance/cann river, or up the highway and through tumut. It is a bout 7-8 hours drive whichever way you go.. I can see where they are coming from with their whinging, seeing as you blokes all drive little zukis on big, bias tyres..
ok wendle this will test your route planning. How far from Goongerah, which is on the Bonang Hwy about 64kms north of Orbost. Its my folks farm and i will be up there on the Anzac weekend
I had breakfast at the cafe in orbost one day (the one with the psuedo grave in the planter out the front) and it was bloody expensive! That is all that I know about orbost.
I'll have a look at a map tonight and let you know.
our club isn't going to the farm over Anzac but it is good to know how far from it , it is. Eden is on the coast of NSW sort of near the Vic border. All you nned to know about Orbost is that you spell it O R B O S T other than that I can't think of anything interesting about it
After c-in this Bar and another, prototype on the weekend i would have to say that it is by far the best lookin stlye of bar that ive seen fitted to a gq (mav)......
It is very temptin to get 1 just to save time in fab and design and this design is the poo for sure looks sweet as the pics show gives very good approach angle to tyres...........i want 1
Not a bad looking bar but are the corners on the top cast pipe corners welded in?
Or is this one piece that has been bent?
Not that there is realy a prob in that area if they are welded in but i have seen these break away real easy with a hard impact.
RUFF wrote:Not a bad looking bar but are the corners on the top cast pipe corners welded in? Or is this one piece that has been bent? Not that there is realy a prob in that area if they are welded in but i have seen these break away real easy with a hard impact.
yep, the top hoop has precast bends to keep the radii tight (just an aesthetic thing to match the cars square bonnet)
H( * )( * )NZ loves B( * )( * )BIES
if a fat lady falls in the forest do the trees laugh?
[quote="RUFF"]although i didnt mean to, i squealed like a girl :armsup:[/quote]
