G'day everyone, was just wondering what lbf/in pressure cap should be used on a 1985 Rangie with a heavy duty radiator. ie the cap on the expansion tank. mine is currently a 15 pound job, but my expansion tank has recently cracked along a seem, mostly due to age but got me to think that the pressure might be to great. The radiator bloke, thought they should around 7-10. My workshop manual also mentions 15 pound maximum capacity for the cooling system. Any idea's as what is best to run?
Cheers
Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.
Radiator Cap's
Moderator: Micka
Radiator Cap's
Go it or blow it
Who is online
Users browsing this forum: No registered users and 7 guests