Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

Deleting free wheeling hubs

Tech Talk for Cruiser owners.

Moderators: toaddog, Elmo, DUDELUX

Forum rules
Post Reply
Posts: 7230
Joined: Mon Oct 21, 2002 10:42 pm
Location: Brisbane

Deleting free wheeling hubs

Post by MissDrew »

I`m thinking of deleting the free wheeling hubs on my hilux and just bolting on the hub like a constant 4x4 80 series has. My hilux is lucky if it does 5,000kms a year now as it mainly does comps and gets towed to most of them so I`m not worried about the front end turning all the time.

Why? 1 less thing to break and no chance of somebody turning out a hub at a comp.

What do you think? and will the ones off a constant 4x4 80 bolt on? If not not model will?
Top
Posts: 1084
Joined: Sun Apr 04, 2004 9:33 pm
Location: Aotearoa

Post by J Top »

I thought this too but mines not a trailer queen, and if you break something its nice to just flick the hub and drive on without worrying
about something locking up or recieving more damage.
J Top
Top
Posts: 6693
Joined: Mon Feb 09, 2004 10:13 pm
Location: Newcastle

Post by high n mighty »

I think 45 series has what you are after Dave, the stud pattern aparently didnt change.
[quote="fool_injected"]
I pity my brother when she is a teenager[/quote]
Top
Posts: 6693
Joined: Mon Feb 09, 2004 10:13 pm
Location: Newcastle

Post by high n mighty »

http://board.marlincrawler.com/index.php?topic=6506.90

Half way down this page, 1982 fj40, american specs may mke a difference though :?
[quote="fool_injected"]
I pity my brother when she is a teenager[/quote]
Top
Posts: 135
Joined: Wed Feb 16, 2005 11:50 pm
Location: Western Australia - Margaret River

Post by ToyTruck »

early 40s and 45s had the "caps" instead of locking hubs .... just make sure the are the same spline count as yours ... there is a fine spline and coarse spline (you can pick the difference by eye they are majorly different)
the 75 series utes at my work run the "caps" so they would stop breaking front hubs so they shouldnt be too hard to find

Matt
[url=http://www.outerlimits4x4.com/PHP_Modules/phpBB2/viewtopic.php?t=40976]ToyTruck[/url] is GONE ..... Time to build a BUGGY
Top
Posts: 826
Joined: Sat Mar 13, 2004 4:18 pm
Location: Northern NSW

Post by slosh »

The 80 hubs should bolt straight on. I replaced my 80 constant 4x4 front hubs with a set of hilux freewheeling hubs.

Toyota must've used the same splined front axles across their whole range from about 85 on.
Top
Posts: 943
Joined: Thu Jul 31, 2003 8:23 pm
Location: Darwin

Post by Tojo »

we call them drive flanges and i've allways wondered why more comp cars don't use them.
Top
Posts: 16934
Joined: Sun Oct 20, 2002 6:57 pm

Post by RUFF »

Dont use them Dave. If you break a CV in competition and the wheel locks up you cant unlock the hub and continue. I have never broke a stock asian hub. As long as they are bolted on Tight they never fail.
Top
Posts: 331
Joined: Thu Feb 17, 2005 9:49 am
Location: Albury

Post by roberts »

surf mabey
Top
Posts: 2944
Joined: Tue Feb 11, 2003 5:47 pm
Location: Manjimup, Western Australia

Contact:
Contact ausyota

Post by ausyota »

roberts wrote:surf mabey

IFS lux are different spline count to solid front I believe.
Paul.
R.I.P Brock Fontanini 28-3-06 - 16-2-08
www.teamcarnage.net
Top
Posts: 7230
Joined: Mon Oct 21, 2002 10:42 pm
Location: Brisbane

Post by MissDrew »

RUFF wrote:Dont use them Dave. If you break a CV in competition and the wheel locks up you cant unlock the hub and continue. I have never broke a stock asian hub. As long as they are bolted on Tight they never fail.


I have had 1 let go, it only broke when the cv broke. The only lock up I have ever had from a broken cv was the steering and unlocking the hub doesn`t fix that.
Top
Posts: 943
Joined: Thu Jul 31, 2003 8:23 pm
Location: Darwin

Post by Tojo »

doesn't take long to undo a few bolts and remove the drive flange.
Top
Posts: 713
Joined: Tue Nov 05, 2002 2:12 pm
Location: Brisbane

Post by Hybrid »

Tojo wrote:doesn't take long to undo a few bolts and remove the drive flange.


Tony would be talking mid stage.
Top
Posts: 552
Joined: Mon May 26, 2003 2:47 pm
Location: across the pond

Post by beanz2 »

Anything for a solid axle Toyota 1976-1997 will work. The bolt pattern is the same. The only ones that can give you trouble are ones from the 1995-1997 full time 80 series, as they are deeper so that your c-clip will not fit at the end of the CV.

Dave
Top
Posts: 3924
Joined: Mon Oct 21, 2002 10:35 pm
Location: Newcastle NSW

Contact:
Contact hypo

Post by hypo »

keep the lockin hubs...

and guts the only person that has had there hubs unlocked in a comp was cheezy and last years nissan trials and i think thhat it was u that did it anyways, u just tryin 2 save the embaressment of him doin it back 2 u :armsup: :armsup: :armsup: :roll: :roll: :roll: :finger: :finger: :finger: :finger: :finger: :finger:
:finger: HYPOFAB :finger:

Thanks to:

Polyperformance
Yuri 4x4
Longfield
Top
Posts: 2097
Joined: Tue Aug 12, 2003 6:50 pm
Location: wollongong

Post by dow50r »

Gday
The 80 caps your after are the 1990-1992 constant ones, they use thesame size c/v as the dx's do 1990-98
If you want a pair i will swap you the lux f.w.h's for them....no problem.
Or, $90 each from yota.
Andrew
Top
Posts: 1768
Joined: Sun Mar 14, 2004 11:51 am
Location: Weipa

Post by crankycruiser »

I have hilux hubs on my 80 so the plates should fit the lux.
Top
Post Reply

Return to “Cruiser / Prado”

Who is online

Users browsing this forum: No registered users and 1 guest