. So I replaced the lot to be safe as the bearings themselves are pretty cheap (about $35 if you no someone in the business) and it only takes about 4 to 5 hours to do the job. If you have one it would be worthwhile checking as mine had only done about 80,000k's since the bearings were replaced. will put on some pics in a few days
Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.
early 80 series big end bearings
Moderators: toaddog, Elmo, DUDELUX
early 80 series big end bearings
Those who own them all know about the problem (faulty shells), I bought mine a year ago and was told the bearings were done on a recall. Just to be sure i pulled the sump off and one of the caps to check, they had been replaced some time in 1998 (stanped on the shell) but had some wear but also some pitting . So I replaced the lot to be safe as the bearings themselves are pretty cheap (about $35 if you no someone in the business) and it only takes about 4 to 5 hours to do the job. If you have one it would be worthwhile checking as mine had only done about 80,000k's since the bearings were replaced. will put on some pics in a few days
. So I replaced the lot to be safe as the bearings themselves are pretty cheap (about $35 if you no someone in the business) and it only takes about 4 to 5 hours to do the job. If you have one it would be worthwhile checking as mine had only done about 80,000k's since the bearings were replaced. will put on some pics in a few daysWho is online
Users browsing this forum: No registered users and 0 guests