Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

rim {internal beadlock}

General Tech Talk

Moderators: toaddog, TWISTY, V8Patrol, Moderators

Forum rules
Post Reply
Posts: 1095
Joined: Sat Nov 30, 2002 7:53 am
Location: SYDNEY

Contact:
Contact thunder

rim {internal beadlock}

Post by thunder »

would it be safe to weld up the hole from the internal beadlock?

1 of my internal beadlock rims is a bit buckled and i would like to swap it with the spare but dont have a beadlock on the spare. i would like to plug the hole so i still have a spare. weld it or find a plug for it..
Bar work RDG
www.rdgengineering.com
ADRENALIN TRANSPORT
Top
Posts: 2136
Joined: Mon Dec 01, 2003 6:36 pm
Location: Lake Macquarie

Post by 4sum4 »

weld it,grind all the powder coat away and put a peice of brass behind it and plug weld it
[url=http://downunder4x4.net/forum/showthread.php?t=1650]86 Hilux[/url]
and a 84 extra cab



If Rocks Had P^ssies Our Lives Would Be Perfect :D...
Top
Posts: 1321
Joined: Tue Aug 03, 2004 7:56 pm
Location: Jamisiontown NSW

Post by MARKx4 »

WHEN I HAD MY RIMS CUT AND FLIPED THEY WELDED THE HOLE IN HIT IT WITH A GRINDER AND REPEATED THE PROCESS A COUPLE OF THIME TO BE SURE. BEFORE I PUT THE TYRES BACK ON I JUST WIPED SOME BOSTIC SEAL N FLEX OVER IT ON THE INSIDE. THEY HAVENT LEAKED AT ALL. I SAY WELD AWAY :)
Its not cool, unless it's got boost :)
Top
Posts: 1095
Joined: Sat Nov 30, 2002 7:53 am
Location: SYDNEY

Contact:
Contact thunder

Post by thunder »

thanks guys..
ill weld it this w/end
Bar work RDG
www.rdgengineering.com
ADRENALIN TRANSPORT
Top
Posts: 902
Joined: Wed Jul 21, 2004 5:29 pm
Location: Sydney

Post by stool »

How`s the new paint going on the tray Steve
GQ with big nuts
Top
Posts: 1095
Joined: Sat Nov 30, 2002 7:53 am
Location: SYDNEY

Contact:
Contact thunder

Post by thunder »

stool wrote:How`s the new paint going on the tray Steve

finished last night ..ill update in members.
Bar work RDG
www.rdgengineering.com
ADRENALIN TRANSPORT
Top
Posts: 227
Joined: Mon Sep 20, 2004 8:05 pm
Location: the vegas

Post by benno_from_brizvegas »

the dude who cut and flipped my rims just welded the holes.... one of the welds didn't penetrate enough (I guess) and leaked a bit. I stuck some slime in there a few months ago and it hasn't leaked yet ;)
Top
Posts: 2877
Joined: Mon May 10, 2004 9:46 pm
Location: Goodna QLD

Post by ludacris »

I had three of mine migged once grinded back and perfect.

LudaCris
Cris's 4 X 4 Accessories & Suspension 0404 736 325 Rock Sliders From $499
Top
Posts: 1041
Joined: Wed Jan 07, 2004 1:09 pm
Location: Melbourne, Victoria

Post by Mudzuki »

Why not put a second valve in, quicker to air down. Its only a spare.
Top
Posts: 1321
Joined: Tue Aug 03, 2004 7:56 pm
Location: Jamisiontown NSW

Post by MARKx4 »

Mudzuki wrote:Why not put a second valve in, quicker to air down. Its only a spare.

They did that on screwys and they leaked so he pulled them out and welded them up.
Its not cool, unless it's got boost :)
Top
Post Reply

Return to “General Tech”

Who is online

Users browsing this forum: No registered users and 13 guests