Who would be interested in a piece of plate like this

Post by **bubs** » Mon Mar 31, 2003 9:53 pm

This plate is designed to mount to the back of a hilux transfer case to replace the standard style cross member

ok

i have fixed the angle on the plate in regards to the frame :oops:

and i have narrowed it to fit between a standard hilux frame

so answer yes or no to the poll

Post by **bubs** » Mon Mar 31, 2003 9:55 pm

it is only the plate which i intend to make for the mean time you make it fit

12mm plate plasma cut

Post by **Brad** » Tue Apr 01, 2003 6:31 am

all about $$$ really .. any ideas how much ??

Post by **bubs** » Tue Apr 15, 2003 10:36 pm

i have gotten a response on the price - laser cut way too many $$'s - plasma no contract style cutters use a high definition plasma like my work so all holes need to be machine drilled

cost $75 + shipping

it is now 10mm as it would be easier to get 10mm longer bolts rather than 12mm

plate now has oil fill hole as well

please pm if interested - wont be ready till may as i will order the plates next tuesday then it will be a week till i get them back to then be drilled

Post by **Brad** » Tue Apr 15, 2003 11:24 pm

You have mail

Post by **spazbot** » Wed Apr 16, 2003 11:11 am

Have you got a shot of one mounted, im keen

Post by **bubs** » Wed Apr 16, 2003 5:06 pm

not yet - i could take one of richards rock crawler - but the angle on his plate was wrong so it was cut and welded

Outer Limits 4x4 Board

Who would be interested in a piece of plate like this

Would you buy it

Who would be interested in a piece of plate like this

cost

..

Who is online