Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

Flipping Rims

General Tech Talk

Moderators: toaddog, TWISTY, V8Patrol, Moderators

Forum rules
Post Reply
Posts: 1569
Joined: Tue May 11, 2004 9:43 pm
Location: Newcastle

Contact:
Contact HRZOOK

Flipping Rims

Post by HRZOOK »

I was considering trying to flip some rims at home. With just some basic tools and alot of patience.

Has any one attempted to do this?

Was it successful?

Would it work??

Thanks in advance
HRZOOK
Top
Posts: 1275
Joined: Mon Jan 13, 2003 10:32 pm
Location: Sydney

Post by Gonzo »

How much does it cost to have them flipped professionally, $80 or so?

Do you have the tools to spin them up strait and make sure they are balanced?
Top
Posts: 498
Joined: Tue May 04, 2004 7:48 pm
Location: sydney

Post by HUNTERLUX »

ive watched the guys do mine way 2 much work 2 b done in the back shed 4 $70 bucks u can get them fliped up the road from my place
if u send them down with some1 ill drop them off 4 u
Top
Posts: 2134
Joined: Tue May 11, 2004 6:03 pm
Location: Armidale

Post by BOGAN V8 »

HUNTERLUX wrote:ive watched the guys do mine way 2 much work 2 b done in the back shed 4 $70 bucks u can get them fliped up the road from my place
if u send them down with some1 ill drop them off 4 u


Totaly agree with mick had a mate of ours have a set done by a tool making friend and he said not worth Dont skimp on rims you dont want them breakin away at 110klms that could be a bit scary
:shock: :shock: :shock: :shock: :shock: :shock:

get a Oz wheel to do it and all is good :D :D :D
94 HJZ 80 GXL 4 Inch lift 35s. TJM Accessories Front to back
Top
Posts: 1569
Joined: Tue May 11, 2004 9:43 pm
Location: Newcastle

Contact:
Contact HRZOOK

Post by HRZOOK »

Gonzo wrote:How much does it cost to have them flipped professionally, $80 or so?


HUNTERLUX wrote: 4 $70 bucks u can get them fliped up the road from my place


BOGAN wrote:Dont skimp on rims


OK so I am a tight ass and didn't realise it was so cheap. :)

Anyway when ya right ya right and you guys are right at that price I'll pay to have em professionally done :cool:

HRZOOK
Top
Posts: 3924
Joined: Mon Oct 21, 2002 10:35 pm
Location: Newcastle NSW

Contact:
Contact hypo

Post by hypo »

HRZOOK wrote:
Gonzo wrote:How much does it cost to have them flipped professionally, $80 or so?


HUNTERLUX wrote: 4 $70 bucks u can get them fliped up the road from my place


BOGAN wrote:Dont skimp on rims


OK so I am a tight ass and didn't realise it was so cheap. :)

Anyway when ya right ya right and you guys are right at that price I'll pay to have em professionally done :cool:

HRZOOK


Heath,

Promac engineering at Cardiff do it, they only quoted me $70 a rim 2 do it...
:finger: HYPOFAB :finger:

Thanks to:

Polyperformance
Yuri 4x4
Longfield
Top
Posts: 1569
Joined: Tue May 11, 2004 9:43 pm
Location: Newcastle

Contact:
Contact HRZOOK

Post by HRZOOK »

hypolux wrote:
HRZOOK wrote:
Gonzo wrote:How much does it cost to have them flipped professionally, $80 or so?


HUNTERLUX wrote: 4 $70 bucks u can get them fliped up the road from my place


BOGAN wrote:Dont skimp on rims


OK so I am a tight ass and didn't realise it was so cheap. :)

Anyway when ya right ya right and you guys are right at that price I'll pay to have em professionally done :cool:

HRZOOK


Heath,

Promac engineering at Cardiff do it, they only quoted me $70 a rim 2 do it...


Thanks Hypo

Daryl said he rang them and they said they didn't do it :?

Maybe he spoke to an apprentice that has no idea

I'll give em a ring

Ta
Top
User avatar
lay80n
God Of Emo
Posts: 7350
Joined: Sun Aug 24, 2003 7:04 pm
Location: Newy, home of the ZOOK (Rockin the 'diff)

Contact:
Contact lay80n

Post by lay80n »

Sam at overkill said bout $80 when i asked him.
Layto....
[quote="v840"]Just between me and you, I actually really dig the Megatwon, but if anyone asks, I'm going to shitcan it as much as possible! :D[/quote]
Top
Posts: 13555
Joined: Fri Nov 15, 2002 1:28 pm
Location: Melbourne

Post by grimbo »

yeah myself and gwagensteve did mine. Just took it nice and slow, measured twice welded once. So far they have been fine and on the car for nearly 3.5 years with no dramas, leaks etc still run true with no more adverse handling than what the swampers add
Ransom note = demand + collage
Top
Posts: 7954
Joined: Fri Sep 05, 2003 5:43 pm
Location: Tasmania

Post by DeWsE »

Yeah flipped them at home. They farked up a bit so had to go back and redo two. Matter of setting them up on diff and spinning against a square. Ended up getting it right. Then balanced them wid tires

$38 each near me
[quote="STD CONSUMER"]haha, i'm tellin you, my camp was hard to find on Saturday night!
then i shared my bed with 2 second tom... [/quote]
Top
Posts: 644
Joined: Wed Sep 01, 2004 3:11 pm
Location: N.S.W

possible

Post by tuf045 »

this might help




http://www.pirate4x4.com/forum/showthread.php?t=337433

he is using a drum brake lathe.
Top
Posts: 1321
Joined: Tue Aug 03, 2004 7:56 pm
Location: Jamisiontown NSW

Post by MARKx4 »

I had mine done for about $50 each at penrith.
Its not cool, unless it's got boost :)
Top
Posts: 1569
Joined: Tue May 11, 2004 9:43 pm
Location: Newcastle

Contact:
Contact HRZOOK

Post by HRZOOK »

Mark Costello wrote:I had mine done for about $50 each at penrith.


Wellllll spit it out ;)

Where at?
Top
User avatar
lay80n
God Of Emo
Posts: 7350
Joined: Sun Aug 24, 2003 7:04 pm
Location: Newy, home of the ZOOK (Rockin the 'diff)

Contact:
Contact lay80n

Post by lay80n »

HRZOOK wrote:
Mark Costello wrote:I had mine done for about $50 each at penrith.


Wellllll spit it out ;)

Where at?


Second that. If you are keen Heath, i want to get a set done. At the moment i will have to wait like 4 weeks at least to get some -28mm offset rims, then i will prob want to flip them anyway. I can get normal offset rims whenever i want, so let me know if ya wanna organise something.
Layto....
[quote="v840"]Just between me and you, I actually really dig the Megatwon, but if anyone asks, I'm going to shitcan it as much as possible! :D[/quote]
Top
Posts: 1321
Joined: Tue Aug 03, 2004 7:56 pm
Location: Jamisiontown NSW

Post by MARKx4 »

lay80n wrote:
HRZOOK wrote:
Mark Costello wrote:I had mine done for about $50 each at penrith.


Wellllll spit it out ;)

Where at?


Second that. If you are keen Heath, i want to get a set done. At the moment i will have to wait like 4 weeks at least to get some -28mm offset rims, then i will prob want to flip them anyway. I can get normal offset rims whenever i want, so let me know if ya wanna organise something.
Layto....

Street Wheels
Unit 9/121 Coreen Avenue, Penrith
02 4721 5893.

Hope that helps :D
Its not cool, unless it's got boost :)
Top
User avatar
lay80n
God Of Emo
Posts: 7350
Joined: Sun Aug 24, 2003 7:04 pm
Location: Newy, home of the ZOOK (Rockin the 'diff)

Contact:
Contact lay80n

Post by lay80n »

They will be gettin a call on monday me thinks.
Layto....
[quote="v840"]Just between me and you, I actually really dig the Megatwon, but if anyone asks, I'm going to shitcan it as much as possible! :D[/quote]
Top
Posts: 443
Joined: Tue Jan 04, 2005 10:08 pm
Location: sydney

Post by mattsluxtruck »

street wheels is a 2 minute drive from my place have had some mates get work done from him before. Good work cheep but he is slow. Also he is not working the business full time now as there is not enough market in steel wheels now days for full time. Give him a try if you cant get on to him dont give up.
Top
Posts: 1321
Joined: Tue Aug 03, 2004 7:56 pm
Location: Jamisiontown NSW

Post by MARKx4 »

mattsluxtruck wrote:street wheels is a 2 minute drive from my place have had some mates get work done from him before. Good work cheep but he is slow. Also he is not working the business full time now as there is not enough market in steel wheels now days for full time. Give him a try if you cant get on to him dont give up.

Yeah he is normally in between 8am and lunch mon to fri and 8am to 11am saturdays. He was quick on mine,. I droped them off on a thursday and he rang me friday arvo saying i coulg pick them up on saturday. So he was quick for me. He is allso going to do my custom 10" rims for me aswell, but he will do them from start, i wont supply him anything. :D
Its not cool, unless it's got boost :)
Top
Posts: 864
Joined: Mon Mar 10, 2003 1:14 am
Location: Between Sugarloaf and the Watagans :)

Post by SAWZALL »

Any updates on this...
Gone drag racing......
Top
Posts: 1321
Joined: Tue Aug 03, 2004 7:56 pm
Location: Jamisiontown NSW

Post by MARKx4 »

SAWZALL wrote:Any updates on this...


YES UP DATES WOULD BE GREAT. i WANT TO GET MY NEW RIMS MADE IN THE NEXT COUPLE OF MONTHS AND I WANT TO KNOW HOW HE TREATS OTHERS OR WAS MY EXPERANCE WITH HIM WAS JUST LUCK.
Its not cool, unless it's got boost :)
Top
Posts: 1562
Joined: Sun Nov 21, 2004 7:26 pm
Location: Blue Mountains

Post by -Richo- »

I plan on visiting that guy at Penrith in a month or 2 will let you know.
Top
Posts: 5457
Joined: Sun Oct 27, 2002 9:49 am
Location: Sydney

Post by Shorty40 »

I just got mine done at Overkill - $100 per rim. Good job :cool:
Top
Posts: 1321
Joined: Tue Aug 03, 2004 7:56 pm
Location: Jamisiontown NSW

Post by MARKx4 »

Shorty40 wrote:I just got mine done at Overkill - $100 per rim. Good job :cool:


Hope that included painting in 2-PAC or powder coating. Mine cost $50 a rim and it was lucky to cost me $60 to paint all 5 rims. Not saying that it wasnt a great job but that price is double of mine.
Its not cool, unless it's got boost :)
Top
Post Reply

Return to “General Tech”

Who is online

Users browsing this forum: No registered users and 120 guests