Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

Saga

Tech Talk for Mitsubishi owners.

Moderator: -Scott-

Forum rules
Post Reply
Posts: 139
Joined: Fri Feb 21, 2003 12:22 pm
Location: Sydney

Contact:
Contact tritonasuras

Post by tritonasuras »

Regarding noise..
1..Could check the engine mounts with the bonnet up, the engine under load to see how much it moves .. Any witness marks where it has hit stuff I.E.. contact with bonnet,transmission tunnel etc

2.. Check rear trailing arm bushes both chassis and diff ends.. May be excessively worn and allowing metal to metal contact under load..

just a couple of hints....

Hope they help

Rob
Top
Posts: 2739
Joined: Sat Oct 26, 2002 7:50 am
Location: Melbourne

Post by Bitsamissin »

Well I spoke to Rob yesterday and it turned out to be the t/case after all.
Excessive chain slop caused it to jump the sprockets resulting in some serious damage. He is getting a changeover t/case at the moment. The noise became so loud I think it was doing it in 2wd with no load :shock:
Top
Posts: 1949
Joined: Wed Oct 23, 2002 7:44 am
Location: Melbourne, Australia

Post by MKPatrolGuy »

Ouch, so are you getting the old t/case to play with?
[size=100][url=http://www.vickrawlers.com/]VicKrawlers.com[/url]
[url=http://www.drfwdc.org.au/]Dandenong Ranges 4wd Club[/url][/size]
Top
Posts: 139
Joined: Fri Feb 21, 2003 12:22 pm
Location: Sydney

Contact:
Contact tritonasuras

Post by tritonasuras »

On the transfer case subject..

Frank, whats the price for the 2.85 gear set ??
Top
Posts: 2739
Joined: Sat Oct 26, 2002 7:50 am
Location: Melbourne

Post by Bitsamissin »

Dave he is checking for me but it's on an exchange basis so if it's only a few hundred bucks then I'll buy it off him.

Rob it depends on a couple of things panning out.
There is a set being cut now for a Japanese guy, if they work out for him his mate (runs a 4x4 shop) will order 10 sets. I have a few more interested so if we can get 15+ orders for a production run they will be the same price if not cheaper (no middle man) as any Toyo or Nissan low range gear set. We will know in a few months how all this goes...............
Top
Posts: 139
Joined: Fri Feb 21, 2003 12:22 pm
Location: Sydney

Contact:
Contact tritonasuras

Post by tritonasuras »

Sounds good frank
could u keep me posted about them...

On the tech side regarding the transfer gears >>>
whats the effect on gearing etc with these gears (im running 32's)
Ease of instalment

I know i may be asking some pretty boring questions, just getting a understanding .

Thanks frank...

p.s..still investigating about the rear end swap...any info would help...Ta
Top
Posts: 52
Joined: Thu Jan 02, 2003 7:56 pm
Contact:
Contact pajpwr

Post by pajpwr »

As Frank said, it was the t-case after all. The fact it happened downhill in netural was simply windup in the case.

After all the attempts to break it I failed, but did stuff the gears up sufficiently to make a repair job infeasible, so I have a tcase from an NK in with a 3-month guarantee.

Thanks to all those that helped with the diagnosis!

Cheers

--
Robert
http://www.gpsvehiclenavigation.com/
Top
Post Reply

Return to “Mitsubishi”

Who is online

Users browsing this forum: No registered users and 1 guest