Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

Any of you guys made custom bumpstops ?

Tech Talk for Cruiser owners.

Moderators: toaddog, Elmo, DUDELUX

Forum rules
Post Reply
Posts: 141
Joined: Fri Feb 04, 2005 12:40 pm

Any of you guys made custom bumpstops ?

Post by beefa125 »

Hi Guys,

Any of you made custom bumpstops for an IFS hilux, I was going to make some, or buy some but not sure how to go about it,

Cheers

Heath
Top
Posts: 766
Joined: Sun Aug 01, 2004 7:16 pm
Location: brisbane

Post by bruiser »

What are you trying to achieve with custom bump stops?
Top
Posts: 141
Joined: Fri Feb 04, 2005 12:40 pm

Post by beefa125 »

More articulation, the torsion bars have been wound up and they are close to the upper bumstops, I just want a little more movement
Top
Posts: 766
Joined: Sun Aug 01, 2004 7:16 pm
Location: brisbane

Post by bruiser »

Last vehicle I had with torsion bars was a feroza.
Had the same problem when I wound em up.
I just removed the bumstops, cut and ground em back till ther was almost nothing left and bolted em back on.
Worked well
Top
Posts: 141
Joined: Fri Feb 04, 2005 12:40 pm

Post by beefa125 »

Thanks mate I will give it a go
Top
Posts: 2944
Joined: Tue Feb 11, 2003 5:47 pm
Location: Manjimup, Western Australia

Contact:
Contact ausyota

Post by ausyota »

Yeah you can just hack the crap outa them.
They dont have much weight on them anyway they are just there to stop metal on metal contact at full droop.
I bought round shaped poly ones that are thinner than the factory ones and bolted straight in. But in hind sight i would have been just as better off cutting the standard ones.
Paul.
R.I.P Brock Fontanini 28-3-06 - 16-2-08
www.teamcarnage.net
Top
Posts: 1826
Joined: Wed Mar 03, 2004 9:14 pm
Location: nsw

Post by plowy »

JUST CUT EM althow if your picky about presentation try the website burning customs were they make adjustable bump stops for the low rider utes ie hilux
Top
Posts: 7
Joined: Tue Aug 31, 2004 10:12 pm

Post by brettyyy »

ausyota wrote:Yeah you can just hack the crap outa them.
They dont have much weight on them anyway they are just there to stop metal on metal contact at full droop.
I bought round shaped poly ones that are thinner than the factory ones and bolted straight in. But in hind sight i would have been just as better off cutting the standard ones.
Paul.


Paul,

Where did you get the poly ones from? Just any old suspension shop?


Brett.
Top
User avatar
HG
Posts: 450
Joined: Mon Aug 02, 2004 10:11 pm
Location: Mexico where the hills are big

Post by HG »

My custom bump stops call a SOLID AXLE :armsup: :armsup: :armsup:
Cheers
Andrew
----------------------
Just a few mods, nothing over the top.:)
Top
Posts: 141
Joined: Fri Feb 04, 2005 12:40 pm

Post by beefa125 »

HG thats funny :)

I did the job on the weekend, Just Used the dremel to half the bump stops and it worked really well, easy as too.

Cheers

Heath
Top
Posts: 2944
Joined: Tue Feb 11, 2003 5:47 pm
Location: Manjimup, Western Australia

Contact:
Contact ausyota

Post by ausyota »

brettyyy wrote:
ausyota wrote:Yeah you can just hack the crap outa them.
They dont have much weight on them anyway they are just there to stop metal on metal contact at full droop.
I bought round shaped poly ones that are thinner than the factory ones and bolted straight in. But in hind sight i would have been just as better off cutting the standard ones.
Paul.


Paul,

Where did you get the poly ones from? Just any old suspension shop?


Brett.

I got mine from Eddie at 4wd USA.
You can have mine if you want in a month or so hopefully.
Going to try and get some SASing done shortly.

Mine are the same as these ones
Image
Paul.
R.I.P Brock Fontanini 28-3-06 - 16-2-08
www.teamcarnage.net
Top
Posts: 64
Joined: Thu Sep 11, 2003 8:25 am
Location: canberra

bump stop

Post by rumble »

I found a set of Volvo bump stops which are conical so there compress progressively and dont bang like the originals when you bottom out-even with a lift I think its best to use em
Top
Post Reply

Return to “Cruiser / Prado”

Who is online

Users browsing this forum: No registered users and 0 guests