Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

MQ snorkel intalation

Tech Talk for Nissan owners.

Moderators: toaddog, V8Patrol

Forum rules
Post Reply
Posts: 31
Joined: Mon Jan 12, 2004 11:13 pm
Location: Melbourne

MQ snorkel intalation

Post by Happy bloke »

Hi there, i have an Airflow snorkel that i bought brand new, i tried to fit it this weekend but found that i can not fit the section that goes between the actual snorkel to the air cleaner due to the piece of metal that is originaly fitted to vehicle to be used as the original intake.......
Can anyone help me with this prob. or has anyone had this problem???????
Top
Posts: 4275
Joined: Thu Dec 19, 2002 2:12 pm
Location: Sydney

Post by ozy1 »

do you have an L28 or SD33 motor, which metal bit are we talking about?
Top
Posts: 31
Joined: Mon Jan 12, 2004 11:13 pm
Location: Melbourne

Post by Happy bloke »

I got the 3.3 t/d , the piece of metal is the original intake that sits between the guard and the inner guard and it is spot welded.....to the inner guard, it is visual as soon as you remove the plastic section inside the wheel arch.....
Top
Posts: 4275
Joined: Thu Dec 19, 2002 2:12 pm
Location: Sydney

Post by ozy1 »

not too sure, havnt instaslled a snorkel before, but i think that may need to be removed as the snorkel protrudes into the engine bay and you use the flexible rubber hose to attach it, i know thats how Safari snorkels work,

do you have any pics?
Top
Posts: 1
Joined: Sat Mar 19, 2005 4:54 pm

Post by slater »

Yes i have installed severall snorkel before there are about 5 10mm bolts holding that in and them you take out the indicator and place a screwdriver berween the body and the air duct and leaver off will come off with a little bit of effort.
Top
Posts: 766
Joined: Mon Dec 30, 2002 3:08 pm
Location: Melbourne

Post by jtraf »

Your talking about the inner guard here aren't you .....you will have to cut another hole in this just like the guard on the outside. Snorkel will then attach striaght to out filter houseing with flexible ducting or at least the Safaris snorkel does
You do not have the required permissions to view the files attached to this post.
Top
Posts: 5060
Joined: Tue Apr 08, 2003 7:28 pm
Location: Narellan Vale, Sydney

Post by Screwy »

im nearly 100 percent positive, that all MQs came with the hole in the inner guard already from factory, i know all the diesels did anyway............. just get a cetnre mark from the inside to the inside of the outer guard and drill from out side :D
TUFF TRUCK TEAM OPPOSITE LOCK Proudly Sponsored By:

Opposite Lock Narellan, Lightforce Australia, Offroad Systems, Judd Panels, Townsend Signs, RDG Engineering, Central Safety Workwear
Top
Posts: 766
Joined: Mon Dec 30, 2002 3:08 pm
Location: Melbourne

Post by jtraf »

the one in my old MK was cut out with hole saw......so not all had the hole from factory or at least mine didn't
Top
Posts: 31
Joined: Mon Jan 12, 2004 11:13 pm
Location: Melbourne

Post by Happy bloke »

Thanks to all your responses..........But what i did was remove the guard then cut off original intake box which is spot welded to the inner guard and then it was ok to fit the boxed section of the snorkel which conects snorkel to the pre cleaner ......
it now fitted in place realy well with no hassles at all.........
Top
Posts: 5060
Joined: Tue Apr 08, 2003 7:28 pm
Location: Narellan Vale, Sydney

Post by Screwy »

good work dude
TUFF TRUCK TEAM OPPOSITE LOCK Proudly Sponsored By:

Opposite Lock Narellan, Lightforce Australia, Offroad Systems, Judd Panels, Townsend Signs, RDG Engineering, Central Safety Workwear
Top
Post Reply

Return to “Nissan”

Who is online

Users browsing this forum: No registered users and 11 guests