Can someone who has a factory pto unit on a 60series please send me a photo of the selecter position through the floor.
I am about to fit one to mine and want to get the hole in the floor right first time.
Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.
60 series PTO
Moderators: toaddog, Elmo, DUDELUX
60 series PTO
05 Manual HDJ100R
84 HJ60 w/12HT, twin locked with longfields
84 HJ60 w/12HT, twin locked with longfields
It is manual.
The thomas pto is engaged by lifting a knob which goes throught the floor, whereas the factory ones have another gearstick which is used to engage the pto in forward or reverse. This is what i need a photo of. but thanks for the offer.
The thomas pto is engaged by lifting a knob which goes throught the floor, whereas the factory ones have another gearstick which is used to engage the pto in forward or reverse. This is what i need a photo of. but thanks for the offer.
05 Manual HDJ100R
84 HJ60 w/12HT, twin locked with longfields
84 HJ60 w/12HT, twin locked with longfields
I put selector in 'off' and position and eyeballed where the knob would go through the floor
made first incision so that i could put whole stick through floor
then took it real slow until i could guage full movement of the lever - mine engages towards the seat - if you have reverse selctor will need to ensure full forward and backwards...
then went nuts
this is on a 40...same same but different
NO FEAR ...... its only your floor
you'll notice from the red paint the hole is not the full size of the retaining plate....this means you have lots of room if you dont quite get it right.
my tip would be start small and jig your way up to where it needs to be....
cheers scotto
made first incision so that i could put whole stick through floor
then took it real slow until i could guage full movement of the lever - mine engages towards the seat - if you have reverse selctor will need to ensure full forward and backwards...
then went nuts
this is on a 40...same same but different
NO FEAR ...... its only your floor
you'll notice from the red paint the hole is not the full size of the retaining plate....this means you have lots of room if you dont quite get it right.
my tip would be start small and jig your way up to where it needs to be....
cheers scotto
You do not have the required permissions to view the files attached to this post.
www.3rdrock4x4.com
What is the little button on the stick that i have circled in the photo. Is the retaining plate a factory one. if so what model 40 is yours.
Not sure if the new picture will work. but i mean what looks like a button about half way up the front of the pto selector.
Not sure if the new picture will work. but i mean what looks like a button about half way up the front of the pto selector.
You do not have the required permissions to view the files attached to this post.
05 Manual HDJ100R
84 HJ60 w/12HT, twin locked with longfields
84 HJ60 w/12HT, twin locked with longfields
Who is online
Users browsing this forum: No registered users and 1 guest