Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

Extractors - Where to buy? Recommedations!!!

Tech Talk for Jeep owners.

Moderator: GUtripper

Forum rules
Post Reply
Posts: 10
Joined: Wed Jan 12, 2005 5:54 pm

Extractors - Where to buy? Recommedations!!!

Post by mvanbasten9 »

I wanted to replace my factory cracked extractors and was wondering what anyone else replaced them with. Where? How Much? And How Good?

Thanks all........
Top
Posts: 469
Joined: Wed Sep 24, 2003 12:40 pm
Location: Redcliffe/Brisbane

Post by Timmy »

where are you?
Top
Posts: 469
Joined: Wed Sep 24, 2003 12:40 pm
Location: Redcliffe/Brisbane

Post by Timmy »

where are you?
Top
Posts: 469
Joined: Wed Sep 24, 2003 12:40 pm
Location: Redcliffe/Brisbane

Post by Timmy »

where are you?
Top
Posts: 1544
Joined: Tue Oct 22, 2002 8:37 am
Location: Performing booty fab in my Garage

Contact:
Contact Wooders

Post by Wooders »

Common problem.
If you go after market get the Banks IMHO.....
Cheers [url=http://www.wooders.com.au]Wooders[/url]
Top
Posts: 10
Joined: Wed Jan 12, 2005 5:54 pm

Post by mvanbasten9 »

In melbourne!!!
And what are they worth roughly???
Top
Posts: 86
Joined: Sat May 15, 2004 7:27 pm
Location: brissie

Post by millhouse »

most places charge about $600 for aussie brands fitted

I run the banks brand cost me about 500 to land from the usa
and about a day to fit them, best mod i've done so far
2001 tj
a few warn bits
some lockers
blah blah blah
Top
Posts: 452
Joined: Thu Jul 31, 2003 3:21 pm
Location: Sydney

Contact:
Contact `maddog

Post by `maddog »

Some thoughts for you.

- Get stainless steel extractors. They're worth the extra money
- Get them ceramic heat coated
- Make sure whichever brand you do end up getting doesn't route underneath your sump, as it will get crushed the first big rock you go over.
Mantis Motorsports #346

[url]http://www.mantismotorsports.net[/url]
Top
Posts: 194
Joined: Mon Mar 29, 2004 7:03 pm
Location: NOW IN TOWNSVILE

Post by skippy's GQ »

just weld the old one up, it takes about 2 hours in total and only cost $30 for a new manifold gasket. I repair them all the time at work
88 GQ SWB 5''SUS LIFT 60MM BODY LIFT, FRONT LOKKA, NOW WITH 304, ...... :D

www.roverpark.com
Top
Posts: 50
Joined: Mon Apr 11, 2005 3:34 pm
Location: Vic

Post by polly »

had mine welded twice before i got the shits and bout extractors and a 2 1/2 in system
White GQ LWB, TD42, T3 Turbo, 3" dump & exhaust, 2+3" lift, 35 SIMEX, ARB Lockers F&R, 4.6 ratios, 6hp highmount.

Ducati Monster S4
Top
Posts: 17
Joined: Thu Mar 31, 2005 7:56 pm
Location: Limbri

extractors

Post by auntygranty »

If you choose to go after market extractors pay atention to the clearance beside the sump .
Ive had sumps off xj's fitted with them and found a massive buld up of sludge/cabon where they ran too close :!:
He who hesitates is BOGGED
Top
Post Reply

Return to “Jeep”

Who is online

Users browsing this forum: No registered users and 4 guests