Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

legalities of wider diffs

General Tech Talk

Moderators: toaddog, TWISTY, V8Patrol, Moderators

Forum rules
Post Reply
Posts: 3924
Joined: Mon Oct 21, 2002 10:35 pm
Location: Newcastle NSW

Contact:
Contact hypo

legalities of wider diffs

Post by hypo »

just wonder wots the legal stance is on putting wider diffs under a car...

i was under the impression that track width was only allowed 2 increase by 25mm ??

if wider diffs r fitted and the rig is engineered does it then make them legal or does the 25mm adr rule come into voiding the engineers cert just like the tyre argument on enginneers papers ????
:finger: HYPOFAB :finger:

Thanks to:

Polyperformance
Yuri 4x4
Longfield
Top
Posts: 845
Joined: Sun Nov 16, 2003 7:04 pm
Location: sydney , australia

Contact:
Contact hotrod4x4

Post by hotrod4x4 »

in NSW

it goes by the factory specs on the diff u install

"possibly" for commercial vehicles only?? not too sure
but for 4wd's , def. goes by the fitted diff , not the vehicle specs
Top
Posts: 3924
Joined: Mon Oct 21, 2002 10:35 pm
Location: Newcastle NSW

Contact:
Contact hypo

Post by hypo »

ok cool so if i were 2 put 80 series diffs under a zook, as long as i got it engineered and had the wheels and tyres covered by guards or flares it should pass ??????
:finger: HYPOFAB :finger:

Thanks to:

Polyperformance
Yuri 4x4
Longfield
Top
Posts: 845
Joined: Sun Nov 16, 2003 7:04 pm
Location: sydney , australia

Contact:
Contact hotrod4x4

Post by hotrod4x4 »

yep , just get the tyres covered and then engineer the swap
Top
Posts: 826
Joined: Sat Mar 13, 2004 4:18 pm
Location: Northern NSW

Post by slosh »

I thought you'd be the last person to ask this question hypo, seeing as you've already done it once.
Top
User avatar
MEX
Posts: 122
Joined: Sun Jul 25, 2004 8:06 pm
Location: Brisbane

Post by MEX »

IF YOU ARE A QLD'ER REFER TO PAGE 20
http://www.transport.qld.gov.au/qt/driv ... _Jan05.pdf
:)
MEX
SWB MAVERICK
Top
Posts: 792
Joined: Mon Jan 05, 2004 4:43 pm
Location: Campbelltown, Sydney

Contact:
Contact Nev62

Post by Nev62 »

MEX wrote:IF YOU ARE A QLD'ER REFER TO PAGE 20
http://www.transport.qld.gov.au/qt/driv ... _Jan05.pdf
:)
MEX


Gee, I did'nt realise you northen guys had so many regs. I thought there was just one that went something like this.....









NO.

:D
FJ62 Crusier GM V8 Diesel Lockers 33 MTs/35 117 extremes
Macarthur District 4WD Club http://www.macarthur4wdclub.com.au
Top
Posts: 5179
Joined: Fri Dec 05, 2003 8:15 pm
Location: Brisbane Australia

Post by Shadow »

Nev62 wrote:
MEX wrote:IF YOU ARE A QLD'ER REFER TO PAGE 20
http://www.transport.qld.gov.au/qt/driv ... _Jan05.pdf
:)
MEX


Gee, I did'nt realise you northen guys had so many regs. I thought there was just one that went something like this.....









NO.

:D

if you read the 30 or so pages

that pretty much sums it up :P
Top
User avatar
Dee
Posts: 2314
Joined: Thu Mar 10, 2005 1:35 pm
Location: Sunny Coast, QLD

Post by Dee »

hit the nail on the head...

it shits me to tears.... damn qld...
Top
Posts: 158
Joined: Tue Mar 23, 2004 9:48 pm
Location: Cairns, FNQ

Post by Mick_n_Sal »

There appears to be a loophole -

They allow the replacement of diff housings etc.
They do NOT specifically state that the width of the assembly be the same as original housing.
They state that track width can only be increased by up to 50mm with beam axles on 4x4s

So, if one took wider axle assemblies, fitted them with wheels with up to 100% backspacing - the centre track requirements could still be fulfilled. ( none of this takes into account increased wheel bearing loads etc )

Just a thought .....
HIS: '90 FJ73 Awaiting funds for mods
OURS: '00 HZ105 Cruiser - HIDs, GPS, UHF, LF240s, BFG MTs, BB, Steps, Outback Drawers . . . .
Top
Post Reply

Return to “General Tech”

Who is online

Users browsing this forum: No registered users and 6 guests