Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

Hilux Body Blocks

Tech talk for Hilux

Moderators: toaddog, Elmo, DUDELUX

Post Reply
Posts: 88
Joined: Fri Feb 04, 2005 9:34 am
Location: LAUNCESTON, TASMANIA

Hilux Body Blocks

Post by roverlux »

Just wondering what OD you guys use?, grade 5 hi ten bolts ok to use or should i go for grade 8??

And, what sort of material is good for the job, ie: Nylon???

Thanks.
Top
Posts: 2186
Joined: Wed Oct 01, 2003 9:11 pm
Location: Melbourne, now with 1HDFTi power!

Contact:
Contact +dj_hansen+

Post by +dj_hansen+ »

Use grade 8.8 hi tensile... from memory thats 10mm.

Nylon (also known as HDPE IIRC), steel, aluminium... go to plastics joint, most will cut it up for you and everything, prob cost you far less than $100...
Cheers,
Dan.

[i]1996 HDJ80R[/i]
Top
Posts: 2134
Joined: Tue May 11, 2004 6:03 pm
Location: Armidale

Post by BOGAN V8 »

My body blocks are made out of solid aluminuim blocks 65mm in dia

Then with 11mm hole in them and used 10mm high tensile bolts 160mm long thats for a 3 inch body lift not much to it just got a machine shop to order the rod and make it up in the machines cost bout 100 bucks all up including the rod :!: :!: :!: :!:
94 HJZ 80 GXL 4 Inch lift 35s. TJM Accessories Front to back
Top
Posts: 4737
Joined: Wed May 12, 2004 10:39 pm
Location: Brisbane

Post by De-lux »

polyethalene and 8.8
indubitably
Top
Posts: 6693
Joined: Mon Feb 09, 2004 10:13 pm
Location: Newcastle

Post by high n mighty »

I sell(or did) and use nylon and I have 8.8 ;) . Bolts for 2" are around the 130mm mark(from memory)
[quote="fool_injected"]
I pity my brother when she is a teenager[/quote]
Top
Posts: 82
Joined: Thu Jan 13, 2005 6:45 pm
Location: Brisbane

Post by red80 »

I would suggest using as large dia block as you can I made some 2" dia blocks for a hilux i owned a few years ago and it developed cracks in the body after some time. Every other 4b since I have made larger dia blocks and had no problems.
Top
Posts: 6693
Joined: Mon Feb 09, 2004 10:13 pm
Location: Newcastle

Post by high n mighty »

Mine has 65mm all round, will be replacing the front two with 50mm dia when the tube bar eventually gets done though cause the 65mm is too big for the mounts.
[quote="fool_injected"]
I pity my brother when she is a teenager[/quote]
Top
Posts: 7230
Joined: Mon Oct 21, 2002 10:42 pm
Location: Brisbane

Post by MissDrew »

My hilux has done 7 years of hard driving and comps and for 5 or 6 of that has had a 2 inch body lift it with 50mm dia blocks, when I pulled it down it had 1 crack in the body in a spot which is commen on hilux anyway, even standard ones. Shit I just spilt me bloody drink :bad-words: what a farken waste of jimy :bad-words: man I never do that :roll:
Top
Posts: 2134
Joined: Tue May 11, 2004 6:03 pm
Location: Armidale

Post by BOGAN V8 »

Guts wrote:My hilux has done 7 years of hard driving and comps and for 5 or 6 of that has had a 2 inch body lift it with 50mm dia blocks, when I pulled it down it had 1 crack in the body in a spot which is commen on hilux anyway, even standard ones. Shit I just spilt me bloody drink :bad-words: what a farken waste of jimy :bad-words: man I never do that :roll:


that means your really pi55ed if you spilt your drink :) :) :) :lol: :lol:
94 HJZ 80 GXL 4 Inch lift 35s. TJM Accessories Front to back
Top
Posts: 1544
Joined: Fri Jan 03, 2003 10:33 am
Location: Wahgunyah(REDNECK WONDERLAND) Victoria

Post by Webbie »

BOGAN wrote:
Guts wrote:My hilux has done 7 years of hard driving and comps and for 5 or 6 of that has had a 2 inch body lift it with 50mm dia blocks, when I pulled it down it had 1 crack in the body in a spot which is commen on hilux anyway, even standard ones. Shit I just spilt me bloody drink :bad-words: what a farken waste of jimy :bad-words: man I never do that :roll:


that means your really pi55ed if you spilt your drink :) :) :) :lol: :lol:


No thats just means he a wobbly piss head. :armsup: :D
Lockers or Knockers ,both will make for fun.

HYBRID 4B PRDUCTS Visit Tigerz11 here http://www.tigerz11.com.au/ and LOCKTUP 4x4 here http://www.locktup4x4.com.au/ cheers

www.trailtrack4x4.com
Top
Posts: 7230
Joined: Mon Oct 21, 2002 10:42 pm
Location: Brisbane

Post by MissDrew »

I should mod your arses tonight, but farked if I can fid the delete button :lol:
Top
Post Reply

Return to “Hilux”

Who is online

Users browsing this forum: No registered users and 1 guest