Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

Alternator upgrade

Tech Talk for Suzuki owners.

Moderators: lay80n, sierrajim

Forum rules
Post Reply
User avatar
cj
Posts: 1913
Joined: Tue Jul 01, 2003 10:30 pm
Location: Melbourne

Alternator upgrade

Post by cj »

Was having a look at the Mazda KL engine 90 amp alternator and I reckon it should fit but noticed it had a 2 wire plug while my Vit has a 3 wire plug. Anybody done this swap know what to do wiring wise?
[quote="4WD Stuff"]
I haven't quoted Grimbo because nobody takes him seriously :finger: :finger: :finger: :finger: [/quote]
Top
Posts: 4583
Joined: Fri Jun 11, 2004 5:57 pm
Location: Wheeling in my backyard

Post by sierrajim »

after killing vitara alternator 5 or 6, possibly even 7 last wekend. i think i need to do the same.

Apparently you can adapt one of the commodore alternators that has a fan setup that does not drag mud inside?
[quote="Harb"]Well I'm guessing that they didn't think everyone would carry on like a big bunch of sooky girls over it like they have........[/quote]
Top
Posts: 813
Joined: Wed Aug 18, 2004 10:21 pm
Location: Hobart

Post by Spike_Sierra »

ive got myself a 65 amp pajero one, didnt realise i needed to connect up other wires
a sparky mate said i only needed the main power wire coming off, maybe diff alternators need different things.

what car is the alterntor off. sounds nice
85 LWB w. FRP Canopy
Ca18det conversion in progress, Vit PS, RUF,
6.5:1's, 33x12.5 Bfg's, custom front and rear bars.
Top
Posts: 83
Joined: Tue May 25, 2004 1:49 pm
Location: Southern Tasmania

Post by Pat Murray »

Go for a Falcon EL 105 amp alternator--so straight forward! 5 minutes with a flat file inside one leg of the alternator and it fell onto the Zook bracket. Replace the 20 amp original fusible link with a 50 amp one and you're cruisin'. This unit has an electronic regulator which is a lot more clever about how it recharges the battery(s). I have 700w out front and it copes easily. Good luck.
Happiness is life in low range!
Top
Posts: 5714
Joined: Fri Nov 22, 2002 3:55 pm
Location: Perth WA.

Post by nicbeer »

That sounds like a plan. Are they Bosch ones? Any particluar model EL?

Would the gl 6 pack one be the same.

cheers for the info.
[url=http://www.outerlimits4x4.com/viewtopic.php?p=930942#930942&highlight=]Zook[/url]
U SUK Zook Built and Sold.
New rig is 97 80 DX. 2" list 33s
Top
Posts: 73
Joined: Thu Jul 03, 2003 9:02 am
Location: Australia, Gold Coast QLD

Post by Sirzooky »

how much for the ford alt?

cheers
Ando
Have
"07 Mazda BT-50
Offset rims, tints + UHF
Had
"96 Coil Sprung Sierra
31s on Offset 15x7s
2" spring lift + 2" BL
Top
Posts: 62
Joined: Wed Feb 16, 2005 10:42 am
Location: USA new jersey

Contact:
Contact wildchild1066

Post by wildchild1066 »

chevy alt. will work to if yuou can get one
GOING THE DISTANCE
[img]http://i7.photobucket.com/albums/y300/wildchild1066/DSC00759SmallCustom.jpg[/img]
Top
Posts: 216
Joined: Sat Jul 12, 2003 5:48 pm
Location: Gold Coast QLD Rig: '90 Zook WT

Post by jabtronic »

I've heard that the EL alt is the same as the AU. Also heard that they're the same but the mounts differ.

Can anyone confirm if the AU will fit? They're probably easier to source.
Top
Posts: 164
Joined: Sun May 11, 2003 7:18 pm
Location: Melbourne

Post by EARSEZOOK »

I am running an 85amp alternator out of a Suzuki swift 1.6, the only thing to remember when you install this is to take all the brackets off the motor also.
PROCOMP -> What more can I say?
Top
Posts: 1569
Joined: Tue May 11, 2004 9:43 pm
Location: Newcastle

Contact:
Contact HRZOOK

Post by HRZOOK »

EARSEZOOK wrote:I am running an 85amp alternator out of a Suzuki swift 1.6, the only thing to remember when you install this is to take all the brackets off the motor also.


So grab the swift brackets and than they mount straight to the Sierra location??
Top
Posts: 13555
Joined: Fri Nov 15, 2002 1:28 pm
Location: Melbourne

Post by grimbo »

II just took my alternator to an auto elec and had them rewind it (or whatever they do) and its now about 120amp
Ransom note = demand + collage
Top
Posts: 164
Joined: Sun May 11, 2003 7:18 pm
Location: Melbourne

Post by EARSEZOOK »

Re-winding is good but the actual working capacity is about 22.5% and they will only comfortably charge with the engine over 2000RPM.

Also they can suffer from limited life span after doing this.

As for the brackets, not 100% sure about sierra blocks, but I know it will work in a vit.
PROCOMP -> What more can I say?
Top
Posts: 1569
Joined: Tue May 11, 2004 9:43 pm
Location: Newcastle

Contact:
Contact HRZOOK

Post by HRZOOK »

grimbo wrote:II just took my alternator to an auto elec and had them rewind it (or whatever they do) and its now about 120amp


What did this cost ya Grimbo?
Top
Posts: 4583
Joined: Fri Jun 11, 2004 5:57 pm
Location: Wheeling in my backyard

Post by sierrajim »

has anyone mounted their alternator (on a Vit) higher on the motor than standard?

I keep filling mine with mud, i've found that they don't like it.
[quote="Harb"]Well I'm guessing that they didn't think everyone would carry on like a big bunch of sooky girls over it like they have........[/quote]
Top
Posts: 5714
Joined: Fri Nov 22, 2002 3:55 pm
Location: Perth WA.

Post by nicbeer »

With the EL one. Is this a vbelt and not a muti v the same as a sierra?

cheers
[url=http://www.outerlimits4x4.com/viewtopic.php?p=930942#930942&highlight=]Zook[/url]
U SUK Zook Built and Sold.
New rig is 97 80 DX. 2" list 33s
Top
Posts: 83
Joined: Tue May 25, 2004 1:49 pm
Location: Southern Tasmania

Post by Pat Murray »

Mine is a Mitsubishi but many were Bosch. They were 105 amp. or 108 amp. respectively. they come with a multigroove pulley but any self-respecting sparky will be able to find a a V- belt pulley to suit. Mine needed to have a collar machined off the back-5 minute job! Don't worry about 80 amp alternators, go for the biggest you can. Winches and a bank of Lightforces suck current big time! I paid $90.00 and that is typical.
Happiness is life in low range!
Top
Posts: 13555
Joined: Fri Nov 15, 2002 1:28 pm
Location: Melbourne

Post by grimbo »

HRZOOK wrote:
grimbo wrote:II just took my alternator to an auto elec and had them rewind it (or whatever they do) and its now about 120amp


What did this cost ya Grimbo?


it cost me about $120
Ransom note = demand + collage
Top
Post Reply

Return to “Suzuki”

Who is online

Users browsing this forum: No registered users and 27 guests