Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

help with sump bolts torque setting

Tech Talk for Nissan owners.

Moderators: toaddog, V8Patrol

Forum rules
Post Reply
Posts: 318
Joined: Fri Jun 04, 2004 10:03 pm
Location: Bundaberg QLD

Contact:
Contact H@MMeR

help with sump bolts torque setting

Post by H@MMeR »

hi all i looking for some help with sump bolts torque setting so i dont stuff the gasket and do i torque in down in 1 go or 2-3 stages some help would be great
Michael
Top
Posts: 1552
Joined: Wed Dec 22, 2004 12:09 pm
Location: im at wello point

Post by bilby »

start at the middle left looking from rear of sump and work like a head sequence tighten to 16 - 20 nm

DODGY DIAGRAM BUT HOPE YOU GET THE IDEA !!!!
You do not have the required permissions to view the files attached to this post.
just a little left of insanity :)
Top
Posts: 318
Joined: Fri Jun 04, 2004 10:03 pm
Location: Bundaberg QLD

Contact:
Contact H@MMeR

Post by H@MMeR »

mate the pic looks great :) thanks :) do you do it in stages ??
hammer

bilby wrote:start at the middle left looking from rear of sump and work like a head sequence tighten to 16 - 20 nm

DODGY DIAGRAM BUT HOPE YOU GET THE IDEA !!!!
Top
Posts: 1552
Joined: Wed Dec 22, 2004 12:09 pm
Location: im at wello point

Post by bilby »

H@MMeR wrote:mate the pic looks great :) thanks :) do you it in stages ??
hammer

bilby wrote:start at the middle left looking from rear of sump and work like a head sequence tighten to 16 - 20 nm

DODGY DIAGRAM BUT HOPE YOU GET THE IDEA !!!!


NOPE DODGY PAINT SHOP DIAGRAM
doesnt say anything bout stages for tightenin

reading outta the manual so it should be similar

hope it helps
cheers bill
just a little left of insanity :)
Top
Posts: 318
Joined: Fri Jun 04, 2004 10:03 pm
Location: Bundaberg QLD

Contact:
Contact H@MMeR

Post by H@MMeR »

bill it dose help thanks dude :)

bilby wrote:
H@MMeR wrote:mate the pic looks great :) thanks :) do you it in stages ??
hammer

bilby wrote:start at the middle left looking from rear of sump and work like a head sequence tighten to 16 - 20 nm

DODGY DIAGRAM BUT HOPE YOU GET THE IDEA !!!!


NOPE DODGY PAINT SHOP DIAGRAM
doesnt say anything bout stages for tightenin

reading outta the manual so it should be similar

hope it helps
cheers bill
Top
Post Reply

Return to “Nissan”

Who is online

Users browsing this forum: No registered users and 1 guest