hey all
can anyone help me out with the size of the bump stop
on the front off a brand new gu ute
Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.
BUMP STOP SIZE
BUMP STOP SIZE
05 ST GU Coil cab
5" lift
35" simex ET 2
5" lift
35" simex ET 2
Size? Do you want height or diameter?
The diameter of the metal mounting plate on the front bump stop of my 2000 GU is 90mm, the rubber vulcanized to it is prob only about 80mm at it widest point. Height I'm not sure, never needed to know but you should be able to measure it through the coil.
Shouldn't think a later model would be any different.
The diameter of the metal mounting plate on the front bump stop of my 2000 GU is 90mm, the rubber vulcanized to it is prob only about 80mm at it widest point. Height I'm not sure, never needed to know but you should be able to measure it through the coil.
Shouldn't think a later model would be any different.
KRiS
Who is online
Users browsing this forum: No registered users and 1 guest