Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

disco springs in range rover?

Tech Talk for Rover owners.

Moderator: Micka

Forum rules
Post Reply
Posts: 2
Joined: Fri Dec 31, 2004 4:41 pm

disco springs in range rover?

Post by geoffr »

i have a 81 2 door rangie which has front and rear bars, will have a winch up front soon, i'm running a slightly worked 4.4lt with 4spd and 33'' mongrels,and i have been reading on this site about removing the load leveler for increased articulation.
i will be installing a 2'' lift soon and was wondering what springs to use. i was wondering if progressive rate coils from a disco would go well in the rear along with some polyairs as the truck will be used to tow heavy loads sometimes.
i am also wondering what diff upgrades people would recommend as the rear diff only lasted 2 hours off road before punching a gear out the housing!!

thanks
Geoff
Top
Posts: 29
Joined: Tue Nov 09, 2004 1:59 pm

Post by kurmit »

Wouldent use progresive rate springs we do a replasement spring to compensate for removing the load leveler and can do a set of springs to suit your winch springs only $360 for 4 you can call 0397396989 and ask for Adrian
A & J racing
Top
Post Reply

Return to “Rover”

Who is online

Users browsing this forum: No registered users and 25 guests