Pitman Arm

Post by **Hales231271** » Wed Mar 30, 2005 2:36 pm

Started putting in a Bundy front in my lux and I need to know
what pitman arm I need to fit the stock ifs steering box and
work with the Bundy steering.
I know I might have to change ball joint or make a new taper,just want to do it to the right arm.

Cheers
Dazza

Post by **4sum4** » Wed Mar 30, 2005 4:33 pm

Need more info like what are you doing ect,x/over or high steer you can use the IFS pitman arm

Post by **Hales231271** » Wed Mar 30, 2005 10:12 pm

I have a Bundy front and I am putting it into a 2004 model hilux.
therefore I am using the IFS box.
I am using the stock steering from a bundy which is factory cross over.
I need to connect the drag steering link to the ifs steering box.
So what Pitman arm should I use on the ifs box.

Post by **Hales231271** » Thu Mar 31, 2005 2:27 pm

No one???

Post by **4sum4** » Thu Mar 31, 2005 7:01 pm

you keep the box stock with the stock pitman arm and depends how you want to run the drag link and tie rod

Outer Limits 4x4 Board

Pitman Arm

Pitman Arm

Who is online