kinda a longshot this one.
i am getting a set of 2.0" airshox soon.
i am building the diffs now to suit(a-frame and 5 link.)
i know the ends use a 1/2" i.d. spherical bearing.
i dont know how wide the spherical bearing is and how wide the supplied spacers are.
i'm kinda hoping somebody can tell me how far apart i need to make my mounting plates for the shock. i just want to get all the brackets finished and painted. and it will be a few weeks till i get the shocks.
thanks, james
Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.
fox airshox question.
Moderators: toaddog, TWISTY, V8Patrol, Moderators
Screwy_ScrewBall wrote:sorry to hijack.....
But ive heard these cannot be engineered?
can u engineer fox air shocks???
cheers
I cant realy see why not. Airbags are legal and these realy are not that different to Airbags.
If an Airbag goes flat the vehicle sits on its Bump stops. If the Airshock goes flat it also sits on the Bump stops.
We have a heap of them but dont import them or re-sell them. Contact Mat or sean at M&M Custom engineering/ABT www.abt4x4.com
thanks ruff, that would be a great help.
i have been told that engineers don't like airshox as a means of holding the weight of a vehicle. however they are fine to be used as a damper. if you were to try engineer them i have been told you can just add a coil spring of an insignificantly small spring rate to give you that "mechanical means" this really defeats the purpose of an airshock though.
i was bemused by the fact that rover uses airbags. but airshox are not legal. personally i would have thought a balloon(airbag) would be less reliable than an airshock which requires a seal to give out. a seal would more likely leak and slowly loose pressure, wheras an airbag might burst???
just my 2c worth.
i have been told that engineers don't like airshox as a means of holding the weight of a vehicle. however they are fine to be used as a damper. if you were to try engineer them i have been told you can just add a coil spring of an insignificantly small spring rate to give you that "mechanical means" this really defeats the purpose of an airshock though.
i was bemused by the fact that rover uses airbags. but airshox are not legal. personally i would have thought a balloon(airbag) would be less reliable than an airshock which requires a seal to give out. a seal would more likely leak and slowly loose pressure, wheras an airbag might burst???
just my 2c worth.
Timmy wrote:why is there not much talk on the Swayaway Air Shocks over here yet?
they're available, sean at ABT sells them, a mate of mine has a set going onto his cruiser as we speak
http://www.outerlimits4x4.com/PHP_Modul ... hp?t=40379
edit-> as for not much talk about them, i dont really no why, guess cause noone is really using them out here yet, even though many of the yanks seem to prefer them to the fox shocks (the first version at least, not the 2.0)
85lux wrote:hey ruff, wondering if you had a chance to measure those shocks???
I think you are better off waiting until you get the shocks. Then you can make the mounting plates, bolt them up to the shocks, set the rig at ride height, set the shocks at ride height and just weld them in.
I wouldnt weld the mounts onto the axle until you had the axles in the rig and the shocks ready to go cause you will fark up for sure.
Sam
Who is online
Users browsing this forum: No registered users and 16 guests