Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

Firewall

Tech Talk for Rover owners.

Moderator: Micka

Forum rules
Post Reply
Posts: 8459
Joined: Mon Nov 29, 2004 8:15 pm
Location: Townsville

Firewall

Post by "CANADA" »

has anyone successfully built from scratch a front bulkhead/firewall for a series? or even repaired? pics and a write up would be great if anyone has anything
[quote="dazza30875"]whats "FAIL" mean[/quote]

[quote="fool_injected"]

Sometimes your funny Canada :D[/quote]
Top
User avatar
toaddog
Tickle me!
Posts: 3824
Joined: Wed Jun 23, 2004 11:25 pm

Post by toaddog »

Mine will be getting patched and galvanised shortly I know of 2 others up in Cairns which have been dipped as well.
2008 Patrol wagon and 99 Patrol TD Ute
Cairns
Top
Posts: 5803
Joined: Wed Feb 19, 2003 3:02 pm
Location: Brisbane

Post by ISUZUROVER »

I have repaired and galvanised a couple of them in the past. Repair is very easy if you can use a mig and a grinder. Expect a bit of warping rippling of the thin sections when galvanising - but that shouldn't effect the overall straightness (more than LR's tolerances anyway). SIII firewalls are not as strong as IIA - have heard some stories of them warping too much, but have seen plenty of successfully galvanised ones.

I have seen one or 2 homemade ones before, but only for S1's (simpler design). It would be a lot of work to make one for a IIA or SIII.
_____________________________________________________________
RUFF wrote:Beally STFU Your becoming a real PITA.
Top
Post Reply

Return to “Rover”

Who is online

Users browsing this forum: No registered users and 0 guests