Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

please any boby who has tail shaft

Tech Talk for Nissan owners.

Moderators: toaddog, V8Patrol

Forum rules
Post Reply
Posts: 20
Joined: Tue Jan 04, 2005 7:47 pm
Location: melbourne south eastern suburbs

Contact:
Contact beentherewreckedthat2005

please any boby who has tail shaft

Post by beentherewreckedthat2005 »

not worn please get back to us thanks[/img]
You do not have the required permissions to view the files attached to this post.
Top
Posts: 314
Joined: Sun Oct 17, 2004 7:46 pm
Location: Melbourne

Post by AndrewPatrol »

you wanna tailshaft for a twenty YO car "not worn"
I dont understand!!!!!!!!!!
Top
Posts: 5060
Joined: Tue Apr 08, 2003 7:28 pm
Location: Narellan Vale, Sydney

Post by Screwy »

Front or rear?

Diesel or petrol?

all are different.

I have a front from a deisel and a custom SOA rear from diesel if that helps.....

screwy
TUFF TRUCK TEAM OPPOSITE LOCK Proudly Sponsored By:

Opposite Lock Narellan, Lightforce Australia, Offroad Systems, Judd Panels, Townsend Signs, RDG Engineering, Central Safety Workwear
Top
Posts: 2979
Joined: Mon Feb 24, 2003 7:03 pm
Location: Melbourne

Post by robbie »

auto and manual are different also I think?
Top
Posts: 5060
Joined: Tue Apr 08, 2003 7:28 pm
Location: Narellan Vale, Sydney

Post by Screwy »

yep they are, but autos are rediculously uncommon and the only ones ive seen have been in wagons not SWBs so i figure its a manuel.....

4 speed or 5 speed???? :D
TUFF TRUCK TEAM OPPOSITE LOCK Proudly Sponsored By:

Opposite Lock Narellan, Lightforce Australia, Offroad Systems, Judd Panels, Townsend Signs, RDG Engineering, Central Safety Workwear
Top
Posts: 20
Joined: Tue Jan 04, 2005 7:47 pm
Location: melbourne south eastern suburbs

Contact:
Contact beentherewreckedthat2005

Post by beentherewreckedthat2005 »

sorry guys its a 5 speed manul and after a front one thank
Top
Posts: 5060
Joined: Tue Apr 08, 2003 7:28 pm
Location: Narellan Vale, Sydney

Post by Screwy »

bugga, cant help ya man...only have a 4 speed desiel front shaft.

dude is it diesel or petrol?

they are different again.

screwy
TUFF TRUCK TEAM OPPOSITE LOCK Proudly Sponsored By:

Opposite Lock Narellan, Lightforce Australia, Offroad Systems, Judd Panels, Townsend Signs, RDG Engineering, Central Safety Workwear
Top
Posts: 766
Joined: Mon Dec 30, 2002 3:08 pm
Location: Melbourne

Post by jtraf »

I got one from an sd33t with the double cardan joint and all.....

spline does have a little bit of play in it but uni's and cardan joint are fine.

make me an offer

Located melbourne
Top
Posts: 680
Joined: Tue May 11, 2004 9:24 pm
Location: Melbourne

Post by MereMale »

Have one that is out of a LWB that was upto a 4spd behind an L28.

If you don't take the one above then pm me to work something out.
As jtraf got in first.

Mere
Top
Posts: 571
Joined: Tue Nov 19, 2002 3:56 pm
Location: New York

Post by zzzz »

I would be interested in one with a double cardan joint if someone has one and the original poster doesn't want it.

Need a double cardan for my jeep, so as long as the joint is good the rest will be cut off and retubed with 1310 unis and yokes.

cheers

z
Top
Post Reply

Return to “Nissan”

Who is online

Users browsing this forum: No registered users and 5 guests