G'day, I'm relatively new to this forum, I haven't really actively participated that much but I was wondering if anyone could help me out. I managed to find out where the noise is coming from. What I did was take off my rear tailshaft, engaged 4wd and locked the hubs and took the car for a test drive. The noise was gone which means the noise is most likely coming from the rear diff. Taking the diff out and changing the bearings is no problem for me but I just had one question. We all know that worn bearings can cause that horrible whining sound, but is it always the two side bearings that carry the axle spline that make that noise or is it possible that it's the other ones, you know the ones that spin around,(I don't know what they're called). I don't want to change these bearings and then find out that it's not it.
One a side note, I'm getting a bit of 'play' in my transfer case and goes clunk when I turn the shafts. Is there an adjustment in it to fix that or am I up for a new transfer case? Thank you for any info in advance
Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.
Noisy Suzi
Who is online
Users browsing this forum: No registered users and 2 guests