Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

Power Steering Pump

Tech Talk for Cruiser owners.

Moderators: toaddog, Elmo, DUDELUX

Forum rules
Post Reply
Posts: 398
Joined: Mon Jun 21, 2004 7:57 pm
Location: Berwick, Vic

Power Steering Pump

Post by g35me »

Anyone experienced a loud pulley noise comming from the power steering pump, could this be a stuffed bearing? I'm afraid it will seize.
Twin Turbo V8 80 Series Ute with Extra Bits
Top
Posts: 701
Joined: Tue Feb 03, 2004 3:04 pm
Location: Melbourne

Post by 80UTE »

What motor is in your 80??? as only the 3F Petrol had a pulley driven pump and those pumps wern't the best, the diesels and FZ motors had direct driven pumps gear driven on the motor.

Wally
Top
Posts: 398
Joined: Mon Jun 21, 2004 7:57 pm
Location: Berwick, Vic

Post by g35me »

You guessed it...its a 3FE Petrol. Would it be the bearing? Any common problems that you could tell me about with that pump?
Twin Turbo V8 80 Series Ute with Extra Bits
Top
Posts: 3349
Joined: Tue Nov 23, 2004 10:29 am
Location: Not where you are

Contact:
Contact Gribble

Post by Gribble »

brian haines wrote:You guessed it...its a 3FE Petrol. Would it be the bearing? Any common problems that you could tell me about with that pump?


You probably have the belt too tight.
\m/
Top
Post Reply

Return to “Cruiser / Prado”

Who is online

Users browsing this forum: No registered users and 1 guest