Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

TB42 ignition timing

Tech Talk for Nissan owners.

Moderators: toaddog, V8Patrol

Post Reply
Posts: 25
Joined: Tue Oct 12, 2004 3:18 pm

TB42 ignition timing

Post by Paps »

Can anyone tell me the optimum ignition timing for a TB42v on gas? Cheers.
Posts: 25
Joined: Tue Oct 12, 2004 3:18 pm

Post by Paps »

Of course, I don't mean a TB42v, I've just got fat fingers.
Posts: 527
Joined: Sat Oct 02, 2004 3:55 pm
Location: Brisbane

Post by adam.s »

It will vary between car's, take it to a dyno and get them to advance it on that.

Set carby up so its at like 3000rpm, apparantly you can do it with a vacuum gauge - you just keep advancing until the vaccuum doesnt advance anymore then turn it back a couple of notches.
Posts: 792
Joined: Wed Feb 16, 2005 7:20 pm
Location: Acting the goat.

Post by BowTieGQ »

I never use a timing light on anything. You want as much advance as you can get without pinging. Keep advancing distributor until motor starts to ping. Then back off a little as a precaution. To then stop pinging when on petrol, keep premium in tank. Costs more but you hardly use it and you gain more from the LPG. If you're fussy, get distributor regraphed for LPG too.
Posts: 309
Joined: Tue Dec 03, 2002 11:43 am
Location: SOMEWHERE IN VICTORIA

Post by TUFF MAV »

If your running points set the dwell before setting the timing.

Kyle
BUGGERED IT'S A TOYOTA THING
Posts: 25
Joined: Tue Oct 12, 2004 3:18 pm

Post by Paps »

Thanks guys. I appreciate the help. I'll give it a try.
Post Reply

Who is online

Users browsing this forum: No registered users and 0 guests