Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

3B oil pressure

Tech Talk for Cruiser owners.

Moderators: toaddog, Elmo, DUDELUX

Forum rules
Post Reply
Posts: 943
Joined: Thu Jul 31, 2003 8:23 pm
Location: Darwin

3B oil pressure

Post by Tojo »

Just wondering what everyone's oil pressure is and how many k's their 3B has done. What is good oil pressure for one of these motors?
Top
Posts: 943
Joined: Thu Jul 31, 2003 8:23 pm
Location: Darwin

Post by Tojo »

surely someone else here has a 3B motor and has an oil pressure gauge fitted? What's your running oil pressure??
Top
Posts: 3073
Joined: Sun Jul 27, 2003 5:37 pm
Location: Mornington Peninsula, Victoria

Contact:
Contact bj42turbo

Post by bj42turbo »

Only got the OEM oil pressure guage which is pretty vague
mine has done 208,000 km aprox

Dazz
Top
Posts: 1284
Joined: Tue Mar 22, 2005 12:31 pm
Location: forest lake BUILDING BOOTYFAB BARWORK

Post by frp88 »

I have a13bt and Iam abit sus on my oil gauge too :roll:
Top
Posts: 615
Joined: Tue Feb 11, 2003 4:59 pm
Location: Geelong Vic

Post by Ruggers »

mines done over 400 with rebuild in the last 50 and the oil pressure sits low at idle and picks with revs. it was worst with the turbo on. i have an oil cooler to fix this but i also run penrite oil that arounf 30/60w oil this helps and lasts a lot longer than other oils
HZJ73, lifted,crawler gears, double locked, sitting on 35's
Top
Posts: 943
Joined: Thu Jul 31, 2003 8:23 pm
Location: Darwin

Post by Tojo »

i got an aftermarket oil pressure gauge and it used to read around 30psi but has dropped recently. Mine has about 375,000km. Was just wondering what everyone eles was and what was usual.
Top
Posts: 1284
Joined: Tue Mar 22, 2005 12:31 pm
Location: forest lake BUILDING BOOTYFAB BARWORK

Post by frp88 »

Well mine is only just run with 135k.The needle is on the 1st bar off the gauge when cold. But when warm only just on.
Top
Posts: 38
Joined: Fri Aug 20, 2004 2:31 pm
Location: South Australia

Post by Chump »

Ruggers wrote:mines done over 400 with rebuild in the last 50 and the oil pressure sits low at idle and picks with revs. it was worst with the turbo on. i have an oil cooler to fix this but i also run penrite oil that arounf 30/60w oil this helps and lasts a lot longer than other oils



is this an ok thing to happen???
Top
Post Reply

Return to “Cruiser / Prado”

Who is online

Users browsing this forum: No registered users and 0 guests