Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

What Compressor?

General Tech Talk

Moderators: toaddog, TWISTY, V8Patrol, Moderators

Posts: 2097
Joined: Mon Jun 14, 2004 8:06 pm
Location: Land of Plenty

Re: compressor

Post by blkmav »

gtwebbie wrote:I spoke to Glenn at airride yesterday and he told me that even though the dc5000 was cheap $250 ,it had a lot of things that were appealing to me and that wern't mentioned by the supplier uch as it had to be away from the elements(dust,water and the like)also it wasn't an oil less compressor so you had to manually oil it wich meant unhooking the tank and the lines :shock: and also it had to be hooked sraight to the battery via a battery cable not wire .So after all this discussion I brought tha Viair 400 he said that matched to a 20L tank it would do all i want and more.BTW i asked weather or not 100% duty cycle was the go and he said that,they are great but slower so i figured that if this will run 33% duty 20mins straight that will do me.At $ 365 including loom and some fittings with a 5 year manufacters quality warrenty too my door i said send it. :D


I'm probably going to do the same. Did Glenn sound a bit Grimace to you?
Weekdays - Prado GXL D4D with some stuff
Weekends - Mav shorty with lots of stuff
Posts: 1544
Joined: Fri Jan 03, 2003 10:33 am
Location: Wahgunyah(REDNECK WONDERLAND) Victoria

compressor

Post by Webbie »

He He He He, You said Grimace :!: :lol:
Lockers or Knockers ,both will make for fun.

HYBRID 4B PRDUCTS Visit Tigerz11 here http://www.tigerz11.com.au/ and LOCKTUP 4x4 here http://www.locktup4x4.com.au/ cheers

www.trailtrack4x4.com
Posts: 1544
Joined: Fri Jan 03, 2003 10:33 am
Location: Wahgunyah(REDNECK WONDERLAND) Victoria

Post by Webbie »

murcod wrote:Seem to be the same compressors in the pics on both sites???

The Maxair works out to be 2.54 CFM. Did the price you paid include hoses and fittings etc?

Some ,although I will have to add the ones to hook up the tank. ;)BTW 2.5 cfm@33% and as tested will do a 35x12.5 from 15-30 in 2 1/4 minutes :armsup:
Lockers or Knockers ,both will make for fun.

HYBRID 4B PRDUCTS Visit Tigerz11 here http://www.tigerz11.com.au/ and LOCKTUP 4x4 here http://www.locktup4x4.com.au/ cheers

www.trailtrack4x4.com
Posts: 212
Joined: Thu Aug 21, 2003 5:15 pm
Location: Birkdale

Post by SASS »

Was told buy tjm that kym bolton runs one of these compressor on his GU with no probs (been fully submerged twice and works fine). I was told they do not require oil! Anyone else use one of these compressors? Every where i look someone else has different write up on them. As for no dust or water environment, it is a fully sealed unit and all the fan does is force air over the motor housing to keep it cool, cant see why they say no water or dust?
Stick it in low and NAIL IT !!!!!!!!!!
Posts: 687
Joined: Sun Apr 04, 2004 9:54 am
Location: Sydney

Post by up2nogood »

http://www.extremeoutback.com/index.cgi ... 108&pid=99

Is this one oilless?

And is it made in Aust?

100% duty cycle & 3cfm looks good......
Post Reply

Who is online

Users browsing this forum: No registered users and 0 guests