Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.
daihatsu general info
Moderator: Tiny
daihatsu general info
what daihatsu parts are the same as other makes eg:
ratios
spline counts
final drives ratios
just seeing if parts may be swapped with different makes
with minimal modifications type of deal
what have u done?
ratios
spline counts
final drives ratios
just seeing if parts may be swapped with different makes
with minimal modifications type of deal
what have u done?
Last edited by Spartacus on Mon Apr 18, 2005 7:23 pm, edited 1 time in total.
MULL
The rear Feroza axle spline count is different (23 or 25 I don't have my FSM handy) from the Toyota which are 30 splines. The Toyota IFS front splines are 27. The Toyota IFS does have a 7.5" ring and pinion which is very close to the Feroza Ring and pinion but not close enough.
5.29:1's ring and pinions are abvailable for the Toyota 8" and 7.5" differentials.
5.29:1's ring and pinions are abvailable for the Toyota 8" and 7.5" differentials.
This is a list of stuff that I kept:
Rancho 5000
Front: 5136
Rear: 5135
Rancho shocks:
The catalog lists:
Daihatsu Feroza 1989-1990 0-1" lift RS5605 (front) RS5136 (rear)
Daihatsu Rocky (US) 1982-1990 0-1" lift RS5136 (front) RS5182 (rear)
Daihatsu Taft 1974-1982 0-1" lift RS5123 (front) RS5123 (rear)
K&N filter:
The part number is R-1380. The price was $36.20. This is a cone
shaped filter.
Gabriel HighJacker rear shocks:
39105
Performance Accessories body lift:
5082
86-89 Toyota 4Runner
Upper fan belt
NAPA 050385
Rancho 9000 lift?
Front: RS99145
Rear: RS99117
Bosch O2: Feroza 10.88 - 12.99 HD-E L300/310 4 cyl. 1.6L Oxygen Sensor 0 258 001 027 Universal Type
NGK O2: Applause 1.6 HD-E 6/1989 - 9/1997 OZA401-E70
Rancho 5000
Front: 5136
Rear: 5135
Rancho shocks:
The catalog lists:
Daihatsu Feroza 1989-1990 0-1" lift RS5605 (front) RS5136 (rear)
Daihatsu Rocky (US) 1982-1990 0-1" lift RS5136 (front) RS5182 (rear)
Daihatsu Taft 1974-1982 0-1" lift RS5123 (front) RS5123 (rear)
K&N filter:
The part number is R-1380. The price was $36.20. This is a cone
shaped filter.
Gabriel HighJacker rear shocks:
39105
Performance Accessories body lift:
5082
86-89 Toyota 4Runner
Upper fan belt
NAPA 050385
Rancho 9000 lift?
Front: RS99145
Rear: RS99117
Bosch O2: Feroza 10.88 - 12.99 HD-E L300/310 4 cyl. 1.6L Oxygen Sensor 0 258 001 027 Universal Type
NGK O2: Applause 1.6 HD-E 6/1989 - 9/1997 OZA401-E70
Spartacus wrote:what would be involved in taking n atlas or rockhopper reduction
gears from toyota or suzi and modifiying it to be adapted to a
rocky? or even a fez
I reckon get custom adaptors made and fit a KluneV
James
94 cxi feroza- coiled rear!!! SOLD !!!!!
05 s/cab 5L-e hilux- bring on the mods
94 cxi feroza- coiled rear!!! SOLD !!!!!
05 s/cab 5L-e hilux- bring on the mods
Spartacus wrote:rocknferoza wrote:Spartacus wrote:what would be involved in taking n atlas or rockhopper reduction
gears from toyota or suzi and modifiying it to be adapted to a
rocky? or even a fez
I reckon get custom adaptors made and fit a KluneV
i was thinkin on dual cases cause i got spare hangin around
Be careful of your tailshaft angle if you go duals.
A kluneV is only 6 inches long
James
94 cxi feroza- coiled rear!!! SOLD !!!!!
05 s/cab 5L-e hilux- bring on the mods
94 cxi feroza- coiled rear!!! SOLD !!!!!
05 s/cab 5L-e hilux- bring on the mods
F70, F75, F77 Differential Specifications
Diffs:
final reduction gear ratio.....3.363 (F an R)
Diff ring gear
no. of teeth ______ 30
outer diameter ___ 204mm
Gear type _______ Hypoid Gear
Final reductin gear:
No. of teeth ______ 11
Outer diameter ___ 85mm
Gear Type _______ hypoid pinion
Diff. Side Gear:
No. of teeth _________ 18
No. inner spline teeth __ 30
No. of diff pinion Teeth _ 10
Pinion Shaft outer Diameter __ 18mm
Diffs:
final reduction gear ratio.....3.363 (F an R)
Diff ring gear
no. of teeth ______ 30
outer diameter ___ 204mm
Gear type _______ Hypoid Gear
Final reductin gear:
No. of teeth ______ 11
Outer diameter ___ 85mm
Gear Type _______ hypoid pinion
Diff. Side Gear:
No. of teeth _________ 18
No. inner spline teeth __ 30
No. of diff pinion Teeth _ 10
Pinion Shaft outer Diameter __ 18mm
MULL
Transmission and transfer specs:
5 speed manual diesel (turbo)
Type: constant mesh type
Gear Ratios:
1st... 3.647 (3.477)
2nd... 2.136 (2.037)
3rd... 1.484 (1.317)
4th... 1 (1)
5th... 0.860 (0.820)
REVERSE... 4.351 (4.418)
GEAR OIL CAPACITY... 2.9
Transfer
Type: constant mesh type
High... 1.297
Low.... 2.370
Gear Oil Capacity.. 1.3
5 speed manual diesel (turbo)
Type: constant mesh type
Gear Ratios:
1st... 3.647 (3.477)
2nd... 2.136 (2.037)
3rd... 1.484 (1.317)
4th... 1 (1)
5th... 0.860 (0.820)
REVERSE... 4.351 (4.418)
GEAR OIL CAPACITY... 2.9
Transfer
Type: constant mesh type
High... 1.297
Low.... 2.370
Gear Oil Capacity.. 1.3
MULL
Who is online
Users browsing this forum: No registered users and 0 guests