Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

Build a tuff truck in 3 weeks

Tech Talk for Suzuki owners.

Moderators: lay80n, sierrajim

Forum rules
Post Reply
Posts: 2134
Joined: Tue May 11, 2004 6:03 pm
Location: Armidale

Post by BOGAN V8 »

Dozoor wrote:I would say its Just to close to the event for a nsw truck to get in :?

Bummer The VIT Looked like a PLAN to me ;)

It takes considerable money and time to get the engineering paper work together , If its like the last TT engineeres reports have all ready been submitted for the NSW vehicles,
Unlike the interstate Guys we can,t build a truck right up to the comp weekend , :?

Certificates previous TT where needed 3 weeks before the event and if you didn,t front them you where out , simple.


Larry


Dont understand we havent put ours in yet
94 HJZ 80 GXL 4 Inch lift 35s. TJM Accessories Front to back
Top
Posts: 2296
Joined: Thu Oct 24, 2002 4:30 pm
Contact:
Contact OVERKILL ENG

Post by OVERKILL ENG »

Okay some pics just for ANTT
You do not have the required permissions to view the files attached to this post.
OVERKILL ENGINEERING
www.overkill4x4.com
Top
Posts: 2296
Joined: Thu Oct 24, 2002 4:30 pm
Contact:
Contact OVERKILL ENG

Post by OVERKILL ENG »

:D
You do not have the required permissions to view the files attached to this post.
OVERKILL ENGINEERING
www.overkill4x4.com
Top
Posts: 3443
Joined: Tue Oct 29, 2002 10:50 pm
Location: Currently On the Road !!

Post by Dozoor »

BOGAN wrote:
Dozoor wrote:I would say its Just to close to the event for a nsw truck to get in :?

Bummer The VIT Looked like a PLAN to me ;)

It takes considerable money and time to get the engineering paper work together , If its like the last TT engineeres reports have all ready been submitted for the NSW vehicles,
Unlike the interstate Guys we can,t build a truck right up to the comp weekend , :?

Certificates previous TT where needed 3 weeks before the event and if you didn,t front them you where out , simple.


Larry


Dont understand we havent put ours in yet


Maybe they have changed there setup , Just relating it to the previuos one .
Top
Posts: 9393
Joined: Tue Oct 29, 2002 11:51 am
Location: Brisbane

Post by antt »

OVERKILL ENGINEERING wrote:Okay some pics just for ANTT


i feel so special :D

some questions

the front is a 3 link correct, it looks like from the 3rd pic the front tailshaft will hit that crossmember, how close is it?

what are you doing about steering, any pics?

get some more pics of the dual case setup!!!!!!!!!!!! are you gonna sell these or what, pm me some info ;)
Top
Posts: 2296
Joined: Thu Oct 24, 2002 4:30 pm
Contact:
Contact OVERKILL ENG

Post by OVERKILL ENG »

antt wrote:
OVERKILL ENGINEERING wrote:Okay some pics just for ANTT


i feel so special :D

some questions

the front is a 3 link correct, it looks like from the 3rd pic the front tailshaft will hit that crossmember, how close is it?

what are you doing about steering, any pics?

get some more pics of the dual case setup!!!!!!!!!!!! are you gonna sell these or what, pm me some info ;)



No the third link doesnt come close with the sierra case the front out put is even lower so ther is more clearance again.
We aren't running dual cases just a sierra one. And yes all will be available as kits even the SAS kit. :armsup:
SAM
OVERKILL ENGINEERING
www.overkill4x4.com
Top
Posts: 864
Joined: Mon Mar 10, 2003 1:14 am
Location: Between Sugarloaf and the Watagans :)

Post by SAWZALL »

Im back....and apparently sorely missed...group hug :D

Ok here is the story.

A) Basically I bit off more than I could chew with this project. Mainly with time management issues :cry:

B) I found a PERFECT candidate for my THR (Tim Hardy Replica) at an awesum price...

C) I went to WERock half way through the build and decided that was the comp for me. A Sierra is MUCH better suited to this style of comp than a Vit.

I have finished and driven a number of Zooks but after they are built I dont keep them long. I had the white hardtop on 33 swampers, my charcoal one that I had for 6 years with 7 different suspension setups etc etc

HOPEFULLY this will be the last one as it is what I have wanted to build since 99. I negotiated an agreement with SAM in relation to the Vit and the work needed on the THR. I am more than happy with this arrangement.

I am not N.A.M. tho we both share two hobbies, this and rockin' fiddy's. BTW N.A.M., where is that WWTHD ring???

Engineering was never going to be a problem for the Vit.

SAM, When did you paint the bottom of the Vit that blue colour.... It is sort of an X90 kinda blue isn't it??????
Gone drag racing......
Top
Posts: 2296
Joined: Thu Oct 24, 2002 4:30 pm
Contact:
Contact OVERKILL ENG

Post by OVERKILL ENG »

Just an Update
All is on Target, rear suspension is finished and welded up.
Transfer case conversion is finished just have the shafts left to do.
Rear of cab has been filled in with panel.
Front links are made and in.(waiting on coils)
Pics to come soon.
SAM
OVERKILL ENGINEERING
www.overkill4x4.com
Top
Posts: 864
Joined: Mon Mar 10, 2003 1:14 am
Location: Between Sugarloaf and the Watagans :)

Post by SAWZALL »

Sounds like hearsay to me...PICS, PICS, PICS
Gone drag racing......
Top
Posts: 2296
Joined: Thu Oct 24, 2002 4:30 pm
Contact:
Contact OVERKILL ENG

Post by OVERKILL ENG »

Tonight.
Rear will be locked front ARb will be fitted.
Steering will be made.
Tailshafts will be made.
Start on the cosmetics (bar work and tunnel work to cover transfer.
SAM

ps will put pics up tonight
OVERKILL ENGINEERING
www.overkill4x4.com
Top
User avatar
A1
Posts: 3451
Joined: Tue Jan 28, 2003 8:57 pm
Location: NEWCASTLE

Post by A1 »

Get Back to work :D ................




So i guess the D DAY deadline will be covered very easily :cool:





A1
[b][i] DAN [/i] [/b]


:silly:
Top
Posts: 9393
Joined: Tue Oct 29, 2002 11:51 am
Location: Brisbane

Post by antt »

OVERKILL ENGINEERING wrote:Tonight.
Rear will be locked front ARb will be fitted.
Steering will be made.
Tailshafts will be made.
Start on the cosmetics (bar work and tunnel work to cover transfer.
SAM

ps will put pics up tonight


what are you doing for steering?
Top
Posts: 2296
Joined: Thu Oct 24, 2002 4:30 pm
Contact:
Contact OVERKILL ENG

Post by OVERKILL ENG »

Antt
Steering will be cross over with a flipped arm.
SAM
OVERKILL ENGINEERING
www.overkill4x4.com
Top
Posts: 3513
Joined: Tue Feb 15, 2005 12:52 am
Location: Perth, WA

Contact:
Contact alien

Post by alien »

Sam - interested in this setup - can you list parts needed and perhaps a pic or three? thanks mate!
The worst thing about censorship is ███████.
Top
Posts: 2296
Joined: Thu Oct 24, 2002 4:30 pm
Contact:
Contact OVERKILL ENG

Post by OVERKILL ENG »

Finally some more pics.
SAM
You do not have the required permissions to view the files attached to this post.
OVERKILL ENGINEERING
www.overkill4x4.com
Top
Posts: 2296
Joined: Thu Oct 24, 2002 4:30 pm
Contact:
Contact OVERKILL ENG

Post by OVERKILL ENG »

:D
You do not have the required permissions to view the files attached to this post.
OVERKILL ENGINEERING
www.overkill4x4.com
Top
Posts: 9393
Joined: Tue Oct 29, 2002 11:51 am
Location: Brisbane

Post by antt »

thanks for the pics sam, looking good

and thats how i was lookin to do my steering, good to see it works
Top
Posts: 2296
Joined: Thu Oct 24, 2002 4:30 pm
Contact:
Contact OVERKILL ENG

Post by OVERKILL ENG »

Now for the paint job. :armsup: :armsup:
SAM
OVERKILL ENGINEERING
www.overkill4x4.com
Top
User avatar
A1
Posts: 3451
Joined: Tue Jan 28, 2003 8:57 pm
Location: NEWCASTLE

Post by A1 »

GEE it wont be CAMO will it , at a guess ;)





Comin along nicely seems as though ya check sheets on wat had to be done will be very close to finish ............



Hows the sierra tho stop that water leak ?? :?


how the fark do ya build it so quick wif only havin after hours to do it :!:



HOW MUCH HAS this build up cost ;) from go to woe .....cheapest to date ya reckon :twisted:



Dan
[b][i] DAN [/i] [/b]


:silly:
Top
Posts: 2296
Joined: Thu Oct 24, 2002 4:30 pm
Contact:
Contact OVERKILL ENG

Post by OVERKILL ENG »

A1MAV wrote:GEE it wont be CAMO will it , at a guess ;)





Comin along nicely seems as though ya check sheets on wat had to be done will be very close to finish ............



Hows the sierra tho stop that water leak ?? :?


how the fark do ya build it so quick wif only havin after hours to do it :!:



HOW MUCH HAS this build up cost ;) from go to woe .....cheapest to date ya reckon :twisted:



Dan


The list is coming along nicely still on track which will mean we should take it for a run this weekend.
Sierra is good only needs harnesses and nets and she is TT ready.
SAM
OVERKILL ENGINEERING
www.overkill4x4.com
Top
Posts: 1676
Joined: Tue Oct 22, 2002 9:26 am
Location: brisbane

Post by 1MadEngineer »

Damn you do nice work sam! :armsup:

Do you build everyones cars? ;)
Top
Posts: 2296
Joined: Thu Oct 24, 2002 4:30 pm
Contact:
Contact OVERKILL ENG

Post by OVERKILL ENG »

1MadEngineer wrote:Damn you do nice work sam! :armsup:

Do you build everyones cars? ;)


No not all :D

Another update.
Sliders are done cage has been started fuel tank is in and mounted. All tailshafts are in Fornt air locker and compressor done. If we had springs we could drive it. :armsup:
OVERKILL ENGINEERING
www.overkill4x4.com
Top
Posts: 3187
Joined: Sat Dec 06, 2003 6:47 pm
Location: Sydney, or @ newy on weekends

Post by RB zook »

OVERKILL ENGINEERING wrote:
1MadEngineer wrote:Damn you do nice work sam! :armsup:

Do you build everyones cars? ;)


No not all :D

Another update.
Sliders are done cage has been started fuel tank is in and mounted. All tailshafts are in Fornt air locker and compressor done. If we had springs we could drive it. :armsup:


got pics :D
TOYZUKI 96 coily zook,lux diffs, 3 inch suspension lift,3 inch body lift, 33'sMTRS,series 4 hopper,power steer,twin air lockers,4 LINK front and rear,2 inch spacers(GOT WIDTH)
Top
Posts: 11892
Joined: Tue Oct 22, 2002 9:53 am
Location: Melbourne

Contact:
Contact N*A*M

Post by N*A*M »

the pan hard and drag link are not lined up?
Top
Posts: 3187
Joined: Sat Dec 06, 2003 6:47 pm
Location: Sydney, or @ newy on weekends

Post by RB zook »

N*A*M wrote:the pan hard and drag link are not lined up?


maby the tie rod end is on the wrong side of the flipped arm

neeed to re taper it ?
TOYZUKI 96 coily zook,lux diffs, 3 inch suspension lift,3 inch body lift, 33'sMTRS,series 4 hopper,power steer,twin air lockers,4 LINK front and rear,2 inch spacers(GOT WIDTH)
Top
Posts: 2296
Joined: Thu Oct 24, 2002 4:30 pm
Contact:
Contact OVERKILL ENG

Post by OVERKILL ENG »

N*A*M wrote:the pan hard and drag link are not lined up?


its the angle of the photo they are in line
SAM
OVERKILL ENGINEERING
www.overkill4x4.com
Top
Posts: 2296
Joined: Thu Oct 24, 2002 4:30 pm
Contact:
Contact OVERKILL ENG

Post by OVERKILL ENG »

Have fallen a bit behind scedule as Guru was sick last night and today.
Some progress pics. We drove it tonight and flexed it up for the shock measurements. Feels very stable. Hopefully tomorrow night it wwill br going off to get painted.
SAM
You do not have the required permissions to view the files attached to this post.
OVERKILL ENGINEERING
www.overkill4x4.com
Top
User avatar
A1
Posts: 3451
Joined: Tue Jan 28, 2003 8:57 pm
Location: NEWCASTLE

Post by A1 »

:cool: LOOOKIN GOOD Sam ..............


Daves gunna be yellin at ya all weekend, not to tell ya where to drive but to keep ya awake ;)



Dan
[b][i] DAN [/i] [/b]


:silly:
Top
Posts: 4882
Joined: Fri Nov 08, 2002 8:36 pm
Location: Medowie, NSW

Post by redzook »

looking good

ill seeya this arvo :D
Team UNDERDOG #233
WERock Australia thanks to
[url]http://www.longfieldsuperaxles.com[/url]
[url]http://www.rockbuggysupply.com[/url]
Top
Posts: 9393
Joined: Tue Oct 29, 2002 11:51 am
Location: Brisbane

Post by antt »

top shiat sam :armsup: , i like the way the tray wraps round the cab :cool:

ps, can you get back to me about that pm about the coils :finger:
Top
Post Reply

Return to “Suzuki”

Who is online

Users browsing this forum: No registered users and 55 guests