Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

Wheel studs

Tech Talk for Suzuki owners.

Moderators: lay80n, sierrajim

Post Reply
Posts: 5714
Joined: Fri Nov 22, 2002 3:55 pm
Location: Perth WA.

Wheel studs

Post by nicbeer »

Hey all

What is required in changing the wheel studs on the rear of the sierra. NT?

I have a new stud ready to go in.

thanks

Nic
[url=http://www.outerlimits4x4.com/viewtopic.php?p=930942#930942&highlight=]Zook[/url]
U SUK Zook Built and Sold.
New rig is 97 80 DX. 2" list 33s
Posts: 5714
Joined: Fri Nov 22, 2002 3:55 pm
Location: Perth WA.

Post by nicbeer »

Someone must have replaced some of these before.

thanks
[url=http://www.outerlimits4x4.com/viewtopic.php?p=930942#930942&highlight=]Zook[/url]
U SUK Zook Built and Sold.
New rig is 97 80 DX. 2" list 33s
Posts: 614
Joined: Sat Jul 31, 2004 2:42 pm

Post by roc box »

take the drum off and knock the stud out and knock the new one in .
84 model hardtop, 86in wb, 36 iroks, locked front and rear, lux diffs, exo, power steer, fuel injected 4k corolla 1.3,auto transmission ,2in wheel spacers,3/4 elliptic rear
Posts: 5714
Joined: Fri Nov 22, 2002 3:55 pm
Location: Perth WA.

Post by nicbeer »

Sweet, i thought it might be something like that.

thanks
[url=http://www.outerlimits4x4.com/viewtopic.php?p=930942#930942&highlight=]Zook[/url]
U SUK Zook Built and Sold.
New rig is 97 80 DX. 2" list 33s
Posts: 614
Joined: Sat Jul 31, 2004 2:42 pm

Post by roc box »

no problem
84 model hardtop, 86in wb, 36 iroks, locked front and rear, lux diffs, exo, power steer, fuel injected 4k corolla 1.3,auto transmission ,2in wheel spacers,3/4 elliptic rear
Posts: 125
Joined: Sun Nov 23, 2003 4:54 am
Location: Seattle, Washington

Post by mtzook »

Don't forget to line up the small splines before you knock it back in.
My tires were rubbing in the front, so I trimmed the hood, and now they're fine...
Posts: 614
Joined: Sat Jul 31, 2004 2:42 pm

Post by roc box »

good advice
84 model hardtop, 86in wb, 36 iroks, locked front and rear, lux diffs, exo, power steer, fuel injected 4k corolla 1.3,auto transmission ,2in wheel spacers,3/4 elliptic rear
Posts: 5714
Joined: Fri Nov 22, 2002 3:55 pm
Location: Perth WA.

Post by nicbeer »

cheers mtzook. i will be doin this on suday.

I need to take the 4 nuts off and the philip head screws as well? to get the drum off.

I've never done the rear brakes only the front.

thanks
[url=http://www.outerlimits4x4.com/viewtopic.php?p=930942#930942&highlight=]Zook[/url]
U SUK Zook Built and Sold.
New rig is 97 80 DX. 2" list 33s
Posts: 614
Joined: Sat Jul 31, 2004 2:42 pm

Post by roc box »

make sure you back off the adjusters on drums before you remove them
84 model hardtop, 86in wb, 36 iroks, locked front and rear, lux diffs, exo, power steer, fuel injected 4k corolla 1.3,auto transmission ,2in wheel spacers,3/4 elliptic rear
Posts: 5714
Joined: Fri Nov 22, 2002 3:55 pm
Location: Perth WA.

Post by nicbeer »

roc box wrote:make sure you back off the adjusters on drums before you remove them


Where are the adjusters when removing the drum? Do i need to remove the adjusters at all? or do mean this for the brakes only.

thanks
[url=http://www.outerlimits4x4.com/viewtopic.php?p=930942#930942&highlight=]Zook[/url]
U SUK Zook Built and Sold.
New rig is 97 80 DX. 2" list 33s
Posts: 1977
Joined: Sat Oct 16, 2004 7:49 pm

Post by OldGold »

download the FSM nic and find out there!
Posts: 614
Joined: Sat Jul 31, 2004 2:42 pm

Post by roc box »

theres a hole in the drum the adjusters are at about 5 + 7 oclock up is back off
84 model hardtop, 86in wb, 36 iroks, locked front and rear, lux diffs, exo, power steer, fuel injected 4k corolla 1.3,auto transmission ,2in wheel spacers,3/4 elliptic rear
Post Reply

Who is online

Users browsing this forum: No registered users and 0 guests